#include "acceleration.h"
#include "ui_acceleration.h"
#include <QDebug>
#include <QJsonDocument>
#include <QJsonArray>
#include <QJsonObject>
#include <QFile>

#include "data_config.h"
#include "vibrationdata.h"
#include "config_mgr.h"

Acceleration::Acceleration(int slot_no_, int channel_, bool active, QWidget *parent) :
    QWidget(parent),
    ui(new Ui::Acceleration) {
    ui->setupUi(this);
    slot_no = slot_no_;
    channel = channel_;
    QString chan = QString("%1").arg(channel);
    QString slot = QString("%1").arg(slot_no);
    ui->label_channel->setText(chan);
    ui->label_slot->setText(slot);
    if (active) {
        ui->label_active->setText("（启用）");
    } else {
        ui->label_active->setText("（停用）");
    }
//    QString filePath_filter = QCoreApplication::applicationDirPath() + QString("\\config\\%1\\filter_%2.json").arg(slot_no).arg(channel);
//    readJsonFile(filePath_filter);
//    QString filePath_variables = QCoreApplication::applicationDirPath() + QString("\\config\\%1\\acceleration_variables_%2.json").arg(slot_no).arg(channel);
//    readJsonFile(filePath_variables);
    Init();
}

Acceleration::~Acceleration() {
    delete ui;
}

void Acceleration::on_checkBox_rms_toggled(bool checked) {
    // TODO: 自定义的回调
    if (checked) {
        if (ui->checkBox_integrate->isChecked()) {
            QStringList items = {"0-25 mm/s rms", "0-50 mm/s rms",  "自定义"};
            ui->comboBox_direct_value_range->clear();
            ui->comboBox_direct_value_range->addItems(items);
            ui->comboBox_direct_value_range->setCurrentIndex(0);
            ui->comboBox_1x_value_range->clear();
            ui->comboBox_1x_value_range->addItems(items);
            ui->comboBox_1x_value_range->setCurrentIndex(0);
            ui->comboBox_2x_value_range->clear();
            ui->comboBox_2x_value_range->addItems(items);
            ui->comboBox_2x_value_range->setCurrentIndex(0);
        } else {
            QStringList items = {"0-20 m/s^2 rms", "0-50 m/s^2 rms", "0-100 m/s^2 rms", "0-200 m/s^2 rms",  "自定义"};
            ui->comboBox_direct_value_range->clear();
            ui->comboBox_direct_value_range->addItems(items);
            ui->comboBox_direct_value_range->setCurrentIndex(0);
            ui->comboBox_1x_value_range->clear();
            ui->comboBox_1x_value_range->addItems(items);
            ui->comboBox_1x_value_range->setCurrentIndex(0);
            ui->comboBox_2x_value_range->clear();
            ui->comboBox_2x_value_range->addItems(items);
            ui->comboBox_2x_value_range->setCurrentIndex(0);
        }
        return;
    }
    if (ui->checkBox_integrate->isChecked()) {
        QStringList items = {"0-25 mm/s pk", "0-50 mm/s pk", "0-100 mm/s pk",  "自定义"};
        ui->comboBox_direct_value_range->clear();
        ui->comboBox_direct_value_range->addItems(items);
        ui->comboBox_direct_value_range->setCurrentIndex(0);
        ui->comboBox_1x_value_range->clear();
        ui->comboBox_1x_value_range->addItems(items);
        ui->comboBox_1x_value_range->setCurrentIndex(0);
        ui->comboBox_2x_value_range->clear();
        ui->comboBox_2x_value_range->addItems(items);
        ui->comboBox_2x_value_range->setCurrentIndex(0);
    } else {
        QStringList items = {"0-20 m/s^2 pk", "0-50 m/s^2 pk", "0-100 m/s^2 pk", "0-200 m/s^2 pk", "0-250 m/s^2 pk", "0-400 m/s^2 pk",  "自定义"};
        ui->comboBox_direct_value_range->clear();
        ui->comboBox_direct_value_range->addItems(items);
        ui->comboBox_direct_value_range->setCurrentIndex(0);
        ui->comboBox_1x_value_range->clear();
        ui->comboBox_1x_value_range->addItems(items);
        ui->comboBox_1x_value_range->setCurrentIndex(0);
        ui->comboBox_2x_value_range->clear();
        ui->comboBox_2x_value_range->addItems(items);
        ui->comboBox_2x_value_range->setCurrentIndex(0);
    }
}

void Acceleration::on_checkBox_integrate_toggled(bool checked) {
    // TODO: 自定义的回调
    if (checked) {
        if (ui->checkBox_rms->isChecked()) {
            QStringList items = {"0-25 mm/s rms", "0-50 mm/s rms",  "自定义"};
            ui->comboBox_direct_value_range->clear();
            ui->comboBox_direct_value_range->addItems(items);
            ui->comboBox_direct_value_range->setCurrentIndex(0);
            ui->comboBox_1x_value_range->clear();
            ui->comboBox_1x_value_range->addItems(items);
            ui->comboBox_1x_value_range->setCurrentIndex(0);
            ui->comboBox_2x_value_range->clear();
            ui->comboBox_2x_value_range->addItems(items);
            ui->comboBox_2x_value_range->setCurrentIndex(0);
        } else {
            QStringList items = {"0-25 mm/s pk", "0-50 mm/s pk", "0-100 mm/s pk",  "自定义"};
            ui->comboBox_direct_value_range->clear();
            ui->comboBox_direct_value_range->addItems(items);
            ui->comboBox_direct_value_range->setCurrentIndex(0);
            ui->comboBox_1x_value_range->clear();
            ui->comboBox_1x_value_range->addItems(items);
            ui->comboBox_1x_value_range->setCurrentIndex(0);
            ui->comboBox_2x_value_range->clear();
            ui->comboBox_2x_value_range->addItems(items);
            ui->comboBox_2x_value_range->setCurrentIndex(0);
        }
        return;
    }
    if (ui->checkBox_rms->isChecked()) {
        QStringList items = {"0-20 m/s^2 rms", "0-50 m/s^2 rms", "0-100 m/s^2 rms", "0-200 m/s^2 rms",  "自定义"};
        ui->comboBox_direct_value_range->clear();
        ui->comboBox_direct_value_range->addItems(items);
        ui->comboBox_direct_value_range->setCurrentIndex(0);
        ui->comboBox_1x_value_range->clear();
        ui->comboBox_1x_value_range->addItems(items);
        ui->comboBox_1x_value_range->setCurrentIndex(0);
        ui->comboBox_2x_value_range->clear();
        ui->comboBox_2x_value_range->addItems(items);
        ui->comboBox_2x_value_range->setCurrentIndex(0);
    } else {
        QStringList items = {"0-20 m/s^2 pk", "0-50 m/s^2 pk", "0-100 m/s^2 pk", "0-200 m/s^2 pk", "0-250 m/s^2 pk", "0-400 m/s^2 pk",  "自定义"};
        ui->comboBox_direct_value_range->clear();
        ui->comboBox_direct_value_range->addItems(items);
        ui->comboBox_direct_value_range->setCurrentIndex(0);
        ui->comboBox_1x_value_range->clear();
        ui->comboBox_1x_value_range->addItems(items);
        ui->comboBox_1x_value_range->setCurrentIndex(0);
        ui->comboBox_2x_value_range->clear();
        ui->comboBox_2x_value_range->addItems(items);
        ui->comboBox_2x_value_range->setCurrentIndex(0);
    }
}

void Acceleration::on_checkBox_1x_ampl_toggled(bool checked) {
    if (checked) {
        ui->comboBox_1x_value_range->setEnabled(true);
        ui->doubleSpinBox_1x_ampl_clamp->setEnabled(true);
        ui->doubleSpinBox_1x_phase_lag_clamp->setEnabled(true);
        return;
    }
    ui->comboBox_1x_value_range->setEnabled(false);
    ui->doubleSpinBox_1x_ampl_clamp->setEnabled(false);
    ui->doubleSpinBox_1x_phase_lag_clamp->setEnabled(false);
}

void Acceleration::on_checkBox_2x_ampl_toggled(bool checked) {
    if (checked) {
        ui->comboBox_2x_value_range->setEnabled(true);
        ui->doubleSpinBox_2x_ampl_clamp->setEnabled(true);
        ui->doubleSpinBox_2x_phase_lag_clamp->setEnabled(true);
        return;
    }
    ui->comboBox_2x_value_range->setEnabled(false);
    ui->doubleSpinBox_2x_ampl_clamp->setEnabled(false);
    ui->doubleSpinBox_2x_phase_lag_clamp->setEnabled(false);
}

void Acceleration::Init() {
    std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
    if (base_ptr == nullptr) {
        qCritical() << "[Acceleration::Init] should not be here";
        return;
    }
    std::shared_ptr<VibrationData> ptr = std::dynamic_pointer_cast<VibrationData>(base_ptr);
    if (ptr->base_config_[channel - 1].channel_type != kVibAcc) {
        // user change the channel type, load acceleration template
//        std::shared_ptr<VibrationData> vib_data = std::make_shared<VibrationData>();
//        ConfigMgr::Instance()->AddCard(vib_data);
//        UpdateData(vib_data);
        return;
    }
    ui->checkBox_low_pass->setChecked(ptr->filter_[channel - 1].filter[0].checked);
    ui->spinBox_low_pass_low->setValue(ptr->filter_[channel - 1].filter[0].low);
    ui->spinBox_low_pass_high->setValue(ptr->filter_[channel - 1].filter[0].high);
    ui->checkBox_high_pass->setChecked(ptr->filter_[channel - 1].filter[1].checked);
    ui->spinBox_high_pass_low->setValue(ptr->filter_[channel - 1].filter[1].low);
    ui->spinBox_high_pass_high->setValue(ptr->filter_[channel - 1].filter[1].high);
    ui->checkBox_band_pass->setChecked(ptr->filter_[channel - 1].filter[2].checked);
    ui->spinBox_band_pass_low->setValue(ptr->filter_[channel - 1].filter[2].low);
    ui->spinBox_band_pass_high->setValue(ptr->filter_[channel - 1].filter[2].high);
    std::shared_ptr<VariableBase> variable_base = ptr->GetChannelPtr(channel);
    if (variable_base == nullptr) {
        qDebug() << "no channel ptr";
        return;
    }
    std::shared_ptr<AccVelVariable> variable_ptr = std::dynamic_pointer_cast<AccVelVariable>(variable_base);
    ui->comboBox_direct_value_range->setCurrentIndex(variable_ptr->direct_.full_scale_range);
    ui->doubleSpinBox_direct_clamp->setValue(variable_ptr->direct_.clamp_value);
//    ui->label_bias_voltage->setText(QString::number(variable_ptr->direct_.bias_voltage));
//    ui->doubleSpinBox_bias_volt_clamp->setValue(variables[i].clamp_value);
//    ui->comboBox_bias_volt_range->setCurrentIndex();
    ui->checkBox_1x_ampl->setChecked(variable_ptr->x1_.checked);
    ui->comboBox_1x_value_range->setCurrentIndex(variable_ptr->x1_.full_scale_range);
    ui->doubleSpinBox_1x_ampl_clamp->setValue(variable_ptr->x1_.clamp_value);
    ui->doubleSpinBox_1x_phase_lag_clamp->setValue(variable_ptr->x1_.phase_lag);
    ui->checkBox_2x_ampl->setChecked(variable_ptr->x2_.checked);
    ui->comboBox_2x_value_range->setCurrentIndex(variable_ptr->x2_.full_scale_range);
    ui->doubleSpinBox_2x_ampl_clamp->setValue(variable_ptr->x2_.clamp_value);
    ui->doubleSpinBox_2x_phase_lag_clamp->setValue(variable_ptr->x2_.phase_lag);
    ui->spinBox_alert->setValue(variable_ptr->delay_.alert);
    ui->doubleSpinBox_danger->setValue(variable_ptr->delay_.danger);
    ui->checkBox_100ms->setChecked(variable_ptr->delay_.active_100ms);
    ui->checkBox_rms->setChecked(variable_ptr->rms_active_);
    ui->checkBox_integrate->setChecked(variable_ptr->integrate_active_);
    ui->checkBox_alert_latching->setChecked(variable_ptr->alert_latching_);
    ui->checkBox_danger_latching->setChecked(variable_ptr->danger_latching_);
    ui->checkBox_timed_ok->setChecked(variable_ptr->timed_ok_);
    ui->comboBox_recorder_output->setCurrentIndex(variable_ptr->recorder_out_.recorder_output);
    ui->checkBox_two_ma_clamp->setChecked(variable_ptr->recorder_out_.two_ma_clamp);
    ui->doubleSpinBox_trip_multiply->setValue(variable_ptr->recorder_out_.trip_multiply);
    ui->comboBox_comparision->setCurrentIndex(variable_ptr->recorder_out_.comparision);
    ui->spinBox_comparision_percentage->setValue(variable_ptr->recorder_out_.percentage);
}

void Acceleration::on_pushButton_confirm_clicked() {
    for (int i = 0; i < 3; i++) {
        if (filter[i].type == "band_pass") {
            filter[i].checked = ui->checkBox_band_pass->isChecked();
            filter[i].low = ui->spinBox_band_pass_low->value();
            filter[i].high = ui->spinBox_band_pass_high->value();
        } else if (filter[i].type == "low_pass") {
            filter[i].checked = ui->checkBox_low_pass->isChecked();
            filter[i].low = ui->spinBox_low_pass_low->value();
            filter[i].high = ui->spinBox_low_pass_high->value();
        } else if (filter[i].type == "high_pass") {
            filter[i].checked = ui->checkBox_high_pass->isChecked();
            filter[i].low = ui->spinBox_high_pass_low->value();
            filter[i].high = ui->spinBox_high_pass_high->value();
        }
    }
    for (int i = 0; i < 4; i++) {
        if (variables[i].type == "direct") {
            variables[i].full_sacle_range = ui->comboBox_direct_value_range->currentIndex();
            variables[i].clamp_value = ui->doubleSpinBox_direct_clamp->value();
        } else if (variables[i].type == "bias_volt") {
            variables[i].clamp_value = ui->doubleSpinBox_bias_volt_clamp->value();
        } else if (variables[i].type == "1x_ampl") {
            variables[i].checked = ui->checkBox_1x_ampl->isChecked();
            variables[i].full_sacle_range = ui->comboBox_1x_value_range->currentIndex();
            variables[i].clamp_value = ui->doubleSpinBox_1x_ampl_clamp->value();
            variables[i].clamp_value = ui->doubleSpinBox_1x_phase_lag_clamp->value();
        } else if (variables[i].type == "2x_ampl") {
            variables[i].checked = ui->checkBox_2x_ampl->isChecked();
            variables[i].full_sacle_range = ui->comboBox_2x_value_range->currentIndex();
            variables[i].clamp_value = ui->doubleSpinBox_2x_ampl_clamp->value();
            variables[i].clamp_value = ui->doubleSpinBox_2x_phase_lag_clamp->value();
        }
    }
    delay.alert = ui->spinBox_alert->value();
    delay.danger = ui->doubleSpinBox_danger->value();
    delay.active_100ms = ui->checkBox_100ms->isChecked();
    alert_variables.rms_active = ui->checkBox_rms->isChecked();
    alert_variables.integrate_active = ui->checkBox_integrate->isChecked();
    alert_variables.alert_latching = ui->checkBox_alert_latching->isChecked();
    alert_variables.danger_latching = ui->checkBox_danger_latching->isChecked();
    alert_variables.timed_ok = ui->checkBox_timed_ok->isChecked();
    alert_variables.recorder_output = ui->comboBox_recorder_output->currentIndex();
    alert_variables.two_ma_clamp = ui->checkBox_two_ma_clamp->isChecked();
    alert_variables.trip_multiply = ui->doubleSpinBox_trip_multiply->value();
    alert_variables.comparision = ui->comboBox_comparision->currentText();
    alert_variables.comparision_percentage = ui->spinBox_comparision_percentage->value();
    QJsonObject filter_obj, variables_obj;
    QJsonArray filter_array;
    for (int i = 0; i < 3; i++) {
        QJsonObject temp_obj;
        temp_obj.insert("type", filter[i].type);
        temp_obj.insert("low", filter[i].low);
        temp_obj.insert("high", filter[i].high);
        temp_obj.insert("checked", filter[i].checked);
        filter_array.append(temp_obj);
    }
    filter_obj.insert("filter", filter_array);
    filter_obj.insert("slot", slot_no);
    filter_obj.insert("id", channel);
    filter_obj.insert("version", 1);
    QJsonArray variables_array;
    for (int i = 0; i < 4; i++) {
        QJsonObject temp_obj;
        temp_obj.insert("type", variables[i].type);
        if (variables[i].type == "direct") {
            temp_obj.insert("full_sacle_range", variables[i].full_sacle_range);
            temp_obj.insert("clamp_value", variables[i].clamp_value);
        } else if (variables[i].type == "bias_volt") {
            temp_obj.insert("clamp_value", variables[i].clamp_value);
            temp_obj.insert("full_sacle_range", variables[i].full_sacle_range);
        } else if (variables[i].type == "1x_ampl" || variables[i].type == "2x_ampl") {
            temp_obj.insert("checked", variables[i].checked);
            temp_obj.insert("full_sacle_range", variables[i].full_sacle_range);
            temp_obj.insert("clamp_value", variables[i].clamp_value);
            temp_obj.insert("phase_lag", variables[i].phase_lag);
        }
        variables_array.append(temp_obj);
    }
    variables_obj.insert("variables", variables_array);
    QJsonObject delay_obj;
    delay_obj.insert("alert", delay.alert);
    delay_obj.insert("danger", delay.danger);
    delay_obj.insert("100ms", delay.active_100ms);
    variables_obj.insert("delay", delay_obj);
    variables_obj.insert("rms_active", alert_variables.rms_active);
    variables_obj.insert("integrate_active", alert_variables.integrate_active);
    variables_obj.insert("alert_latching", alert_variables.alert_latching);
    variables_obj.insert("danger_latching", alert_variables.danger_latching);
    variables_obj.insert("timed_ok", alert_variables.timed_ok);
    variables_obj.insert("recorder_output", alert_variables.recorder_output);
    variables_obj.insert("two_ma_clamp", alert_variables.two_ma_clamp);
    variables_obj.insert("trip_multiply", alert_variables.trip_multiply);
    variables_obj.insert("comparision", alert_variables.comparision);
    variables_obj.insert("comparision_percentage", alert_variables.comparision_percentage);
    variables_obj.insert("slot", slot_no);
    variables_obj.insert("id", channel);
    variables_obj.insert("version", 1);
    this->close();
}

void Acceleration::on_pushButton_set_default_clicked() {
}

void Acceleration::on_pushButton_cancel_clicked() {
    this->close();
}