#ifndef DATA_CONFIG_H
#define DATA_CONFIG_H
#include <QString>
#include <QPushButton>
#include <QLabel>
#include <QList>

typedef unsigned char      uint8_t;
typedef unsigned short     uint16_t;

extern QString g_strServerIp;             // 服务端IP

#define CHANNLE_COUNT 4
typedef struct {
    int slot;
    QString slot_type;
    QString chan_display;
    QString rack_type;
    QPushButton *slot_btn;
    QLabel *slot_label;
} SlotConfig;

enum CMTCommand {
    kEigenvalueCmd = 1,
    kExceptionInfo = 2,
    kUpgradeCard = 3,
    kGetVersionInfo = 4,
    kRelaySetting = 5,
    kRelayStatus = 6,
    kUpgradeProgress = 7
};


typedef struct {
    int id;
    QString channel_name;
    bool standby;
    bool active;
    QString rack_type;
    QString tmr_group;
    QString channel_type;
    QString transducer_name;
    QString scale_factor;
    QString sample_rate;
    float normal_voltage_low;
    float normal_voltage_high;
} SeismicMonitor;

typedef struct {
    QString type;
    int low;
    int high;
    bool checked;
} Filter;

typedef struct {
    QString type;
    QString full_sacle_range;
    int bias_voltage;
    float clamp_value;
    int phase_lag;
    bool checked;
} Variables;

typedef struct {
    int alert;
    float danger;
    bool active_100ms;
} Dealy;
typedef struct {
    bool rms_active;
    bool integrate_active;
    bool alert_latching;
    bool danger_latching;
    bool timed_ok;
    QString  recorder_output;
    bool two_ma_clamp;
    float trip_multiply;
    QString comparision;
    int comparision_percentage;
} Alert_Variables;

typedef struct {
    int id;
    bool active;
    float normal_voltage_low;
    float normal_voltage_high;
    bool automatic_threshold;
    float threshold;
    float hysteresis;
    int events_per_revolution;
    QString record_output;
    bool two_ma_clamp;
    bool alert_latching;
    bool overspeed_latching;
    bool normal_latching;
    int alert_response_time;
    int danger_response_time;
} Tachometer_Variables;

typedef struct {
    QString transducer_name;
    double scale_factor;
} Transducer;

#pragma pack(1)
typedef struct {
    uint8_t head[3];  // 固定值：0xAA55AA
    uint8_t cmd;      // 命令
    int     len;          // 数据长度
    uint8_t crc;      // 数据 CRC 校验和
    char data[0];     // 文件内容
} PackageHead;

typedef struct {
    uint8_t card_id; // 0xff是本机，其它子卡是1～15
    char data[0];
} UpgradeCardReq;

typedef struct {
    uint8_t code; // 0: 上传成功
} UpgradeRsp;

typedef struct {
    uint8_t card_id; // 0xff是本机，其它子卡是1～15
} GetVersionReq;

typedef struct {
    uint8_t fpga; // fpga版本号
    uint8_t sw;   // 软件版本号
    char fpga_data[9]; // fpga版本日期
} VersionRsp;

typedef struct {
    uint8_t card_id; // 0xff是本机，其它子卡是1～15
    uint8_t led_id;  // ok 灯 0xff,rx/tx 灯 0xf1,板卡测试模式 0xee,板卡状态 0xe1,其他 1 ~ 16
    uint8_t led_operate; // 0 OFF,1 ON,2 红色,3 绿色,4 红色1Hz闪烁,5 红色2Hz闪烁,6 绿色闪烁,7 测试状态,8 手动状态,9 工作状态
} RelaySettingReq;

typedef struct {
    uint8_t code;
} RelaySettingRsp;

typedef struct {
    uint8_t card_id; // 0xff是本机，其它子卡是1～15
} RelayStatusReq;

typedef struct {
    uint8_t status; // 7 测试状态,8 手动状态,9 工作状态
} RelayStatusRsp;

#pragma pack()

#endif // DATA_CONFIG_H