#include "radial_vibration.h"
#include "ui_radial_vibration.h"
#include <QFile>
#include <QDebug>
#include <QJsonDocument>
#include <QJsonObject>
#include <QJsonArray>

#include "data_config.h"
#include "vibrationdata.h"
#include "config_mgr.h"

Radial::Radial(int slot_no_, int channel_, bool active, QWidget *parent)
    : QWidget(parent)
    , ui(new Ui::Radial_vibration) {
    ui->setupUi(this);
    slot_no = slot_no_;
    channel = channel_;
    QString chan = QString("%1").arg(channel);
    QString slot = QString("%1").arg(slot_no);
    ui->label_channel->setText(chan);
    ui->label_slot->setText(slot);
    if (active) {
        ui->label_active->setText("（启用）");
    } else {
        ui->label_active->setText("（停用）");
    }
    Init();
}

Radial::~Radial() {
    delete ui;
}

void Radial::on_pushButton_cancel_clicked() {
    this->close();
}

void Radial::on_checkBox_1x_ampl_toggled(bool checked) {

}

void Radial::on_checkBox_2x_ampl_toggled(bool checked) {

}

void Radial::Init() {
    std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
    if (base_ptr == nullptr) {
        qCritical() << "[Radial::Init] should not be here";
        return;
    }
    std::shared_ptr<VibrationData> ptr = std::dynamic_pointer_cast<VibrationData>(base_ptr);
    if (ptr->base_config_[channel - 1].channel_type != kVibRadial) {
        qDebug() << "[Radial::Init] channel type changes";
        return;
    }
    std::shared_ptr<VariableBase> variable_base = ptr->GetChannelPtr(channel);
    if (variable_base == nullptr) {
        qDebug() << "[Radial::Init] no channel ptr";
        return;
    }
    std::shared_ptr<RadialVariable> variable_ptr = std::dynamic_pointer_cast<RadialVariable>(variable_base);
    ui->checkBox_low_pass->setChecked(variable_ptr->filter_[0].checked);
    ui->spinBox_low_pass_low->setValue(variable_ptr->filter_[0].low);
    ui->spinBox_low_pass_high->setValue(variable_ptr->filter_[0].high);
    ui->checkBox_high_pass->setChecked(variable_ptr->filter_[1].checked);
    ui->spinBox_high_pass_low->setValue(variable_ptr->filter_[1].low);
    ui->spinBox_high_pass_high->setValue(variable_ptr->filter_[1].high);
    ui->checkBox_band_pass->setChecked(variable_ptr->filter_[2].checked);
    ui->spinBox_band_pass_low->setValue(variable_ptr->filter_[2].low);
    ui->spinBox_band_pass_high->setValue(variable_ptr->filter_[2].high);
    // processed output
    // -general
    if(variable_ptr->general.output_used)
        ui->comboBox_output_used->setCurrentIndex(0);
    else
        ui->comboBox_output_used->setCurrentIndex(1);
    ui->comboBox_engineering_unit->setCurrentIndex(variable_ptr->general.engineering_unit);
    ui->comboBox_rectifier_funtion->setCurrentIndex(variable_ptr->general.rectifier_function);
    // -alarm
    ui->lineEdit_danger_high_level->setText(QString::number(variable_ptr->danger_high.level));
    ui->lineEdit_danger_high_hysteresis->setText(QString::number(variable_ptr->danger_high.hysteresis));
    ui->lineEdit_danger_high_delay->setText(QString::number(variable_ptr->danger_high.delay));
    ui->checkBox_danger_high_enable->setChecked(variable_ptr->danger_high.enable);
    ui->checkBox_danger_high_latch->setChecked(variable_ptr->danger_high.latch);

    ui->lineEdit_alert_high_level->setText(QString::number(variable_ptr->alert_high.level));
    ui->lineEdit_alert_high_hysteresis->setText(QString::number(variable_ptr->alert_high.hysteresis));
    ui->lineEdit_alert_high_delay->setText(QString::number(variable_ptr->alert_high.delay));
    ui->checkBox_alert_high_enable->setChecked(variable_ptr->alert_high.enable);
    ui->checkBox_alert_high_latch->setChecked(variable_ptr->alert_high.latch);

    ui->lineEdit_danger_low_level->setText(QString::number(variable_ptr->danger_low.level));
    ui->lineEdit_danger_low_hysteresis->setText(QString::number(variable_ptr->danger_low.hysteresis));
    ui->lineEdit_danger_low_delay->setText(QString::number(variable_ptr->danger_low.delay));
    ui->checkBox_danger_low_enable->setChecked(variable_ptr->danger_low.enable);
    ui->checkBox_danger_low_latch->setChecked(variable_ptr->danger_low.latch);

    ui->lineEdit_alert_low_level->setText(QString::number(variable_ptr->alert_low.level));
    ui->lineEdit_alert_low_hysteresis->setText(QString::number(variable_ptr->alert_low.hysteresis));
    ui->lineEdit_alert_low_delay->setText(QString::number(variable_ptr->alert_low.delay));
    ui->checkBox_alert_low_enable->setChecked(variable_ptr->alert_low.enable);
    ui->checkBox_alert_low_latch->setChecked(variable_ptr->alert_low.latch);

    // Gap
    // -general
    if(variable_ptr->gap_general.output_used)
        ui->comboBox_output_used_2->setCurrentIndex(0);
    else
        ui->comboBox_output_used_2->setCurrentIndex(1);
    ui->comboBox_engineering_unit_2->setCurrentIndex(variable_ptr->general.engineering_unit);
    ui->comboBox_rectifier_funtion_2->setCurrentIndex(variable_ptr->general.rectifier_function);
    // -alarm
    ui->lineEdit_danger_high_level_2->setText(QString::number(variable_ptr->gap_danger_high.level));
    ui->lineEdit_danger_high_hysteresis_2->setText(QString::number(variable_ptr->gap_danger_high.hysteresis));
    ui->lineEdit_danger_high_delay_2->setText(QString::number(variable_ptr->gap_danger_high.delay));
    ui->checkBox_danger_high_enable_2->setChecked(variable_ptr->gap_danger_high.enable);
    ui->checkBox_danger_high_latch_2->setChecked(variable_ptr->gap_danger_high.latch);

    ui->lineEdit_alert_high_level_2->setText(QString::number(variable_ptr->gap_alert_high.level));
    ui->lineEdit_alert_high_hysteresis_2->setText(QString::number(variable_ptr->gap_alert_high.hysteresis));
    ui->lineEdit_alert_high_delay_2->setText(QString::number(variable_ptr->gap_alert_high.delay));
    ui->checkBox_alert_high_enable_2->setChecked(variable_ptr->gap_alert_high.enable);
    ui->checkBox_alert_high_latch_2->setChecked(variable_ptr->gap_alert_high.latch);

    ui->lineEdit_danger_low_level_2->setText(QString::number(variable_ptr->gap_danger_low.level));
    ui->lineEdit_danger_low_hysteresis_2->setText(QString::number(variable_ptr->gap_danger_low.hysteresis));
    ui->lineEdit_danger_low_delay_2->setText(QString::number(variable_ptr->gap_danger_low.delay));
    ui->checkBox_danger_low_enable_2->setChecked(variable_ptr->gap_danger_low.enable);
    ui->checkBox_danger_low_latch_2->setChecked(variable_ptr->gap_danger_low.latch);

    ui->lineEdit_alert_low_level_2->setText(QString::number(variable_ptr->gap_alert_low.level));
    ui->lineEdit_alert_low_hysteresis_2->setText(QString::number(variable_ptr->gap_alert_low.hysteresis));
    ui->lineEdit_alert_low_delay_2->setText(QString::number(variable_ptr->gap_alert_low.delay));
    ui->checkBox_alert_low_enable_2->setChecked(variable_ptr->gap_alert_low.enable);
    ui->checkBox_alert_low_latch_2->setChecked(variable_ptr->gap_alert_low.latch);
}

void Radial::on_pushButton_confirm_clicked() {
    std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
    if (base_ptr == nullptr) {
        qCritical() << "[Radial::Init] should not be here";
        return;
    }
    std::shared_ptr<VibrationData> ptr = std::dynamic_pointer_cast<VibrationData>(base_ptr);
    std::shared_ptr<VariableBase> variable_base = ptr->GetChannelPtr(channel);
    if (variable_base == nullptr || variable_base->type_ != kVibRadial) {
        if (variable_base == nullptr) {
            qDebug() << "no channel ptr";
        } else {
            ptr->RemoveChannel(channel);
            qDebug() << "channel type change";
        }
        std::shared_ptr<RadialVariable> variable = std::make_shared<RadialVariable>();
        variable->id_ = channel;
        variable->type_ = kVibRadial;
        variable->filter_[0].checked = ui->checkBox_low_pass->isChecked();
        variable->filter_[0].low = ui->spinBox_low_pass_low->value();
        variable->filter_[0].high = ui->spinBox_low_pass_high->value();
        variable->filter_[1].checked = ui->checkBox_high_pass->isChecked();
        variable->filter_[1].low = ui->spinBox_high_pass_low->value();
        variable->filter_[1].high = ui->spinBox_high_pass_high->value();
        variable->filter_[2].checked = ui->checkBox_band_pass->isChecked();
        variable->filter_[2].low = ui->spinBox_band_pass_low->value();
        variable->filter_[2].high = ui->spinBox_band_pass_high->value();
        // processed output
        // -general
        if(ui->comboBox_output_used->currentIndex() == 0)
            variable->general.output_used = true;
        else
            variable->general.output_used = false;
        variable->general.engineering_unit = ui->comboBox_engineering_unit->currentIndex();
        variable->general.rectifier_function = ui->comboBox_rectifier_funtion->currentIndex();
        // -alarm
        variable->danger_high.level = ui->lineEdit_danger_high_level->text().toDouble();
        variable->danger_high.hysteresis = ui->lineEdit_danger_high_hysteresis->text().toDouble();
        variable->danger_high.delay = ui->lineEdit_danger_high_delay->text().toDouble();
        variable->danger_high.enable = ui->checkBox_danger_high_enable->isChecked();
        variable->danger_high.latch = ui->checkBox_danger_high_latch->isChecked();
        variable->alert_high.level = ui->lineEdit_alert_high_level->text().toDouble();
        variable->alert_high.hysteresis = ui->lineEdit_alert_high_hysteresis->text().toDouble();
        variable->alert_high.delay = ui->lineEdit_alert_high_delay->text().toDouble();
        variable->alert_high.enable = ui->checkBox_alert_high_enable->isChecked();
        variable->alert_high.latch = ui->checkBox_alert_high_latch->isChecked();
//        variable->danger_low.level = ui->lineEdit_danger_low_level->text().toDouble();
//        variable->danger_low.hysteresis = ui->lineEdit_danger_low_hysteresis->text().toDouble();
//        variable->danger_low.delay = ui->lineEdit_danger_low_delay->text().toDouble();
//        variable->danger_low.enable = ui->checkBox_danger_low_enable->isChecked();
//        variable->danger_low.latch = ui->checkBox_danger_low_latch->isChecked();
//        variable->alert_low.level = ui->lineEdit_alert_low_level->text().toDouble();
//        variable->alert_low.hysteresis = ui->lineEdit_alert_low_hysteresis->text().toDouble();
//        variable->alert_low.delay = ui->lineEdit_alert_low_delay->text().toDouble();
//        variable->alert_low.enable = ui->checkBox_alert_low_enable->isChecked();
//        variable->alert_low.latch = ui->checkBox_alert_low_latch->isChecked();
        // Gap
        // -general
        if(ui->comboBox_output_used_2->currentIndex() == 0)
            variable->gap_general.output_used = true;
        else
            variable->gap_general.output_used = false;
        variable->gap_general.engineering_unit = ui->comboBox_engineering_unit_2->currentIndex();
        variable->gap_general.rectifier_function = ui->comboBox_rectifier_funtion_2->currentIndex();
        // -alarm
        variable->gap_danger_high.level = ui->lineEdit_danger_high_level_2->text().toDouble();
        variable->gap_danger_high.hysteresis = ui->lineEdit_danger_high_hysteresis_2->text().toDouble();
        variable->gap_danger_high.delay = ui->lineEdit_danger_high_delay_2->text().toDouble();
        variable->gap_danger_high.enable = ui->checkBox_danger_high_enable_2->isChecked();
        variable->gap_danger_high.latch = ui->checkBox_danger_high_latch_2->isChecked();
        variable->gap_alert_high.level = ui->lineEdit_alert_high_level_2->text().toDouble();
        variable->gap_alert_high.hysteresis = ui->lineEdit_alert_high_hysteresis_2->text().toDouble();
        variable->gap_alert_high.delay = ui->lineEdit_alert_high_delay_2->text().toDouble();
        variable->gap_alert_high.enable = ui->checkBox_alert_high_enable_2->isChecked();
        variable->gap_alert_high.latch = ui->checkBox_alert_high_latch_2->isChecked();
//        variable->gap_danger_low.level = ui->lineEdit_danger_low_level_2->text().toDouble();
//        variable->gap_danger_low.hysteresis = ui->lineEdit_danger_low_hysteresis_2->text().toDouble();
//        variable->gap_danger_low.delay = ui->lineEdit_danger_low_delay_2->text().toDouble();
//        variable->gap_danger_low.enable = ui->checkBox_danger_low_enable_2->isChecked();
//        variable->gap_danger_low.latch = ui->checkBox_danger_low_latch_2->isChecked();
//        variable->gap_alert_low.level = ui->lineEdit_alert_low_level_2->text().toDouble();
//        variable->gap_alert_low.hysteresis = ui->lineEdit_alert_low_hysteresis_2->text().toDouble();
//        variable->gap_alert_low.delay = ui->lineEdit_alert_low_delay_2->text().toDouble();
//        variable->gap_alert_low.enable = ui->checkBox_alert_low_enable_2->isChecked();
//        variable->gap_alert_low.latch = ui->checkBox_alert_low_latch_2->isChecked();
        // add to ptr
        ptr->variables_.push_back(variable);
        this->close();
        return;
    }
    std::shared_ptr<RadialVariable> variable = std::dynamic_pointer_cast<RadialVariable>(variable_base);
    variable->filter_[0].checked = ui->checkBox_low_pass->isChecked();
    variable->filter_[0].low = ui->spinBox_low_pass_low->value();
    variable->filter_[0].high = ui->spinBox_low_pass_high->value();
    variable->filter_[1].checked = ui->checkBox_high_pass->isChecked();
    variable->filter_[1].low = ui->spinBox_high_pass_low->value();
    variable->filter_[1].high = ui->spinBox_high_pass_high->value();
    variable->filter_[2].checked = ui->checkBox_band_pass->isChecked();
    variable->filter_[2].low = ui->spinBox_band_pass_low->value();
    variable->filter_[2].high = ui->spinBox_band_pass_high->value();
    // processed output
    // -general
    if(ui->comboBox_output_used->currentIndex() == 0)
        variable->general.output_used = true;
    else
        variable->general.output_used = false;
    variable->general.engineering_unit = ui->comboBox_engineering_unit->currentIndex();
    variable->general.rectifier_function = ui->comboBox_rectifier_funtion->currentIndex();
    // -alarm
    variable->danger_high.level = ui->lineEdit_danger_high_level->text().toDouble();
    variable->danger_high.hysteresis = ui->lineEdit_danger_high_hysteresis->text().toDouble();
    variable->danger_high.delay = ui->lineEdit_danger_high_delay->text().toDouble();
    variable->danger_high.enable = ui->checkBox_danger_high_enable->isChecked();
    variable->danger_high.latch = ui->checkBox_danger_high_latch->isChecked();
    variable->alert_high.level = ui->lineEdit_alert_high_level->text().toDouble();
    variable->alert_high.hysteresis = ui->lineEdit_alert_high_hysteresis->text().toDouble();
    variable->alert_high.delay = ui->lineEdit_alert_high_delay->text().toDouble();
    variable->alert_high.enable = ui->checkBox_alert_high_enable->isChecked();
    variable->alert_high.latch = ui->checkBox_alert_high_latch->isChecked();
//    variable->danger_low.level = ui->lineEdit_danger_low_level->text().toDouble();
//    variable->danger_low.hysteresis = ui->lineEdit_danger_low_hysteresis->text().toDouble();
//    variable->danger_low.delay = ui->lineEdit_danger_low_delay->text().toDouble();
//    variable->danger_low.enable = ui->checkBox_danger_low_enable->isChecked();
//    variable->danger_low.latch = ui->checkBox_danger_low_latch->isChecked();
//    variable->alert_low.level = ui->lineEdit_alert_low_level->text().toDouble();
//    variable->alert_low.hysteresis = ui->lineEdit_alert_low_hysteresis->text().toDouble();
//    variable->alert_low.delay = ui->lineEdit_alert_low_delay->text().toDouble();
//    variable->alert_low.enable = ui->checkBox_alert_low_enable->isChecked();
//    variable->alert_low.latch = ui->checkBox_alert_low_latch->isChecked();
    // Gap
    // -general
    if(ui->comboBox_output_used_2->currentIndex() == 0)
        variable->gap_general.output_used = true;
    else
        variable->gap_general.output_used = false;
    variable->gap_general.engineering_unit = ui->comboBox_engineering_unit_2->currentIndex();
    variable->gap_general.rectifier_function = ui->comboBox_rectifier_funtion_2->currentIndex();
    // -alarm
    variable->gap_danger_high.level = ui->lineEdit_danger_high_level_2->text().toDouble();
    variable->gap_danger_high.hysteresis = ui->lineEdit_danger_high_hysteresis_2->text().toDouble();
    variable->gap_danger_high.delay = ui->lineEdit_danger_high_delay_2->text().toDouble();
    variable->gap_danger_high.enable = ui->checkBox_danger_high_enable_2->isChecked();
    variable->gap_danger_high.latch = ui->checkBox_danger_high_latch_2->isChecked();
    variable->gap_alert_high.level = ui->lineEdit_alert_high_level_2->text().toDouble();
    variable->gap_alert_high.hysteresis = ui->lineEdit_alert_high_hysteresis_2->text().toDouble();
    variable->gap_alert_high.delay = ui->lineEdit_alert_high_delay_2->text().toDouble();
    variable->gap_alert_high.enable = ui->checkBox_alert_high_enable_2->isChecked();
    variable->gap_alert_high.latch = ui->checkBox_alert_high_latch_2->isChecked();
//    variable->gap_danger_low.level = ui->lineEdit_danger_low_level_2->text().toDouble();
//    variable->gap_danger_low.hysteresis = ui->lineEdit_danger_low_hysteresis_2->text().toDouble();
//    variable->gap_danger_low.delay = ui->lineEdit_danger_low_delay_2->text().toDouble();
//    variable->gap_danger_low.enable = ui->checkBox_danger_low_enable_2->isChecked();
//    variable->gap_danger_low.latch = ui->checkBox_danger_low_latch_2->isChecked();
//    variable->gap_alert_low.level = ui->lineEdit_alert_low_level_2->text().toDouble();
//    variable->gap_alert_low.hysteresis = ui->lineEdit_alert_low_hysteresis_2->text().toDouble();
//    variable->gap_alert_low.delay = ui->lineEdit_alert_low_delay_2->text().toDouble();
//    variable->gap_alert_low.enable = ui->checkBox_alert_low_enable_2->isChecked();
//    variable->gap_alert_low.latch = ui->checkBox_alert_low_latch_2->isChecked();
    this->close();
}


void Radial::on_pushButton_set_default_clicked() {
}