TSI_Config.pro

@@ -34,7 +34,6 @@ SOURCES += \
     tachometer_data.cpp \
     tmrrelayassociation.cpp \
     tmrrelayassociation_data.cpp \
-    trust.cpp \
     velocity.cpp \
     vibrationdata.cpp
 
@@ -66,8 +65,6 @@ HEADERS += \
     tachometer_data.h \
     tmrrelayassociation.h \
     tmrrelayassociation_data.h \
-    trust.h \
-    trust_ds.h \
     velocity.h \
     velocity_ds.h \
     vibrationdata.h
@@ -88,7 +85,6 @@ FORMS += \
     singlerelay.ui \
     tachometer.ui \
     tmrrelayassociation.ui \
-    trust.ui \
     velocity.ui
 
 # Default rules for deployment.

cardbase.h

@@ -49,11 +49,5 @@ class AccVelVariable : public VariableBase {
     bool rms_active_;
     bool integrate_active_;
 };
-// 加速度与速度
-class ThrustVariable : public VariableBase {
-  public:
-    bool alert_latching_;
-    bool danger_latching_;
-    bool timed_ok_;
-};
+
 #endif // CARDBASE_H

config_mgr.cpp

@@ -66,24 +66,19 @@ void ConfigMgr::Save(QString & file_path) {
                     channel_item["power"] = ptr->base_config_[cid].power;
                     channel_item["point_name"] = ptr->base_config_[cid].point_name;
                     channel_item["chan_id"] = ptr->base_config_[cid].chan_id;
-                    channel_item["keyphase"] = ptr->base_config_[cid].keyphase;
-                    channel_item["keyphase_slot"] = ptr->base_config_[cid].keyphase_slot;
-                    channel_item["keyphase_ch"] = ptr->base_config_[cid].keyphase_ch;
                     QJsonArray voltage_range;
                     voltage_range.append(ptr->base_config_[cid].normal_voltage_low);
                     voltage_range.append(ptr->base_config_[cid].normal_voltage_high);
                     channel_item["normal_voltage_range"] = voltage_range;
                     QJsonObject setpoint_data;
-                    if(ptr->base_config_[cid].channel_type != kVibThrust){
-                        setpoint_data["1x_ampl_upper"] = qRound(ptr->alert_danger[cid].x1_ampl_upper * 10)/10.0;
-                        setpoint_data["1x_ampl_lower"] = qRound(ptr->alert_danger[cid].x1_ampl_lower * 10)/10.0;
-                        setpoint_data["1x_ampl_enable"] = ptr->alert_danger[cid].x1_ampl_enable;
-                        setpoint_data["2x_ampl_upper"] = qRound(ptr->alert_danger[cid].x2_ampl_upper * 10)/10.0;
-                        setpoint_data["2x_ampl_lower"] = qRound(ptr->alert_danger[cid].x2_ampl_lower * 10)/10.0;
-                        setpoint_data["2x_ampl_enable"] = ptr->alert_danger[cid].x2_ampl_enable;
-                    }
                     setpoint_data["direct_upper"] = qRound(ptr->alert_danger[cid].direct_upper * 10)/10.0;
                     setpoint_data["direct_enable"] = ptr->alert_danger[cid].direct_enable;
+                    setpoint_data["1x_ampl_upper"] = qRound(ptr->alert_danger[cid].x1_ampl_upper * 10)/10.0;
+                    setpoint_data["1x_ampl_lower"] = qRound(ptr->alert_danger[cid].x1_ampl_lower * 10)/10.0;
+                    setpoint_data["1x_ampl_enable"] = ptr->alert_danger[cid].x1_ampl_enable;
+                    setpoint_data["2x_ampl_upper"] = qRound(ptr->alert_danger[cid].x2_ampl_upper * 10)/10.0;
+                    setpoint_data["2x_ampl_lower"] = qRound(ptr->alert_danger[cid].x2_ampl_lower * 10)/10.0;
+                    setpoint_data["2x_ampl_enable"] = ptr->alert_danger[cid].x2_ampl_enable;
                     setpoint_data["danger_param"] = ptr->alert_danger[cid].danger_param;
                     setpoint_data["danger_upper"] = qRound(ptr->alert_danger[cid].danger_upper * 10)/10.0;
                     setpoint_data["danger_enable"] = ptr->alert_danger[cid].danger_enable;
@@ -152,51 +147,6 @@ void ConfigMgr::Save(QString & file_path) {
                         latching.append(radial_ptr->alert_latching_);
                         latching.append(radial_ptr->danger_latching_);
                         variables["latching"] = latching;
-                    }else if(ptr->base_config_[cid].channel_type == kVibThrust){
-                        std::shared_ptr<ThrustVariable> thrust_ptr = std::dynamic_pointer_cast<ThrustVariable>(base_channel_ptr);
-                        if(thrust_ptr == nullptr){
-                            continue;
-                        }
-                        // filter
-                        QJsonArray filter;
-                        QJsonObject low_pass;
-                        low_pass["low"] = thrust_ptr->filter_[0].low;
-                        low_pass["high"] = thrust_ptr->filter_[0].high;
-                        low_pass["checked"] = thrust_ptr->filter_[0].checked;
-                        filter.append(low_pass);
-                        QJsonObject high_pass;
-                        high_pass["low"] = thrust_ptr->filter_[1].low;
-                        high_pass["high"] = thrust_ptr->filter_[1].high;
-                        high_pass["checked"] = thrust_ptr->filter_[1].checked;
-                        filter.append(high_pass);
-                        QJsonObject band_pass;
-                        band_pass["low"] = thrust_ptr->filter_[2].low;
-                        band_pass["high"] = thrust_ptr->filter_[2].high;
-                        band_pass["checked"] = thrust_ptr->filter_[2].checked;
-                        filter.append(band_pass);
-                        variables["filter"] = filter;
-                        QJsonObject direct;
-                        QJsonObject recorder_out;
-                        QJsonObject delay;
-                        QJsonArray latching;
-                        direct["full_scale_range"] = thrust_ptr->direct_.full_scale_range;
-                        direct["clamp_value"] = thrust_ptr->direct_.clamp_value;
-                        direct["custom"] = thrust_ptr->direct_.custom;
-                        variables["direct"] = direct;
-                        recorder_out["recorder_output"] = thrust_ptr->recorder_out_.recorder_output;
-                        recorder_out["two_ma_clamp"] = thrust_ptr->recorder_out_.two_ma_clamp;
-                        recorder_out["trip_multiply"] = thrust_ptr->recorder_out_.trip_multiply;
-                        recorder_out["comparision"] = thrust_ptr->recorder_out_.comparision;
-                        recorder_out["percentage"] = thrust_ptr->recorder_out_.percentage;
-                        variables["recorder_out"] = recorder_out;
-                        delay["alert"] = thrust_ptr->delay_.alert;
-                        delay["danger"] = thrust_ptr->delay_.danger;
-                        delay["active_100ms"] = thrust_ptr->delay_.active_100ms;
-                        variables["delay"] = delay;
-                        latching.append(thrust_ptr->alert_latching_);
-                        latching.append(thrust_ptr->danger_latching_);
-                        latching.append(thrust_ptr->timed_ok_);
-                        variables["latching"] = latching;
                     } else {
                         std::shared_ptr<AccVelVariable> av_ptr = std::dynamic_pointer_cast<AccVelVariable>(base_channel_ptr);
                         if(av_ptr == nullptr){
@@ -430,9 +380,6 @@ void ConfigMgr::Load(QString filename) {
                 vib_data->base_config_[j].power = channel["power"].toBool();
                 vib_data->base_config_[j].point_name = channel["point_name"].toString();
                 vib_data->base_config_[j].chan_id = channel["chan_id"].toString();
-                vib_data->base_config_[j].keyphase = channel["keyphase"].toBool();
-                vib_data->base_config_[j].keyphase_slot = channel["keyphase_slot"].toInt();
-                vib_data->base_config_[j].keyphase_ch = channel["keyphase_ch"].toInt();
                 //setpoint
                 QJsonObject setpoint_data = channel["setpoint"].toObject();
                 vib_data->alert_danger[j].direct_upper = setpoint_data["direct_upper"].toDouble();
@@ -492,36 +439,6 @@ void ConfigMgr::Load(QString filename) {
                         vib_data->variables_.push_back(variable);
                         break;
                     }
-                    case kVibThrust: {
-                        std::shared_ptr<ThrustVariable> variable = std::make_shared<ThrustVariable>();
-                        // filter
-                        QJsonArray filter_array = tmp_variable["filter"].toArray();
-                        for (int k = 0; k < filter_array.size(); k++) {
-                            QJsonObject filter_ele = filter_array[k].toObject();
-                            variable->filter_[k].low = filter_ele["low"].toInt();
-                            variable->filter_[k].high = filter_ele["high"].toInt();
-                            variable->filter_[k].checked = filter_ele["checked"].toBool();
-                        }
-                        variable->id_ = j + 1;
-                        QJsonObject direct = tmp_variable["direct"].toObject();
-                        variable->direct_.full_scale_range = direct["full_scale_range"].toInt();
-                        variable->direct_.clamp_value = direct["clamp_value"].toDouble();
-                        variable->direct_.custom = direct["custom"].toDouble();
-
-                        QJsonObject recorder_out = tmp_variable["recorder_out"].toObject();
-                        variable->recorder_out_.recorder_output = recorder_out["recorder_output"].toInt();
-                        variable->recorder_out_.two_ma_clamp = recorder_out["two_ma_clamp"].toBool();
-                        QJsonObject delay = tmp_variable["delay"].toObject();
-                        variable->delay_.alert = delay["alert"].toInt();
-                        variable->delay_.danger = delay["danger"].toDouble();
-                        variable->delay_.active_100ms = delay["active_100ms"].toBool();
-                        QJsonObject latching = tmp_variable["latching"].toObject();
-                        variable->alert_latching_ = latching["alert"].toBool();
-                        variable->danger_latching_ = latching["danger"].toBool();
-                        variable->timed_ok_ = latching["timed_ok"].toBool();
-                        vib_data->variables_.push_back(variable);
-                        break;
-                    }
                     case kVibVelocity:
                     case kVibAcc: {
                         std::shared_ptr<AccVelVariable> variable = std::make_shared<AccVelVariable>();

data_config.h

@@ -42,9 +42,7 @@ typedef enum {
 typedef enum {
     kVibRadial = 0, // 径向位移
     kVibAcc = 1, // 加速度
-    kVibVelocity = 2, // 速度
-    kVibThrust = 3,     //轴向位移
-    kVibPressurePulsation = 4 //动态压力脉动
+    kVibVelocity = 2 // 速度
 } VibChannelType;
 
 typedef struct SlotConfig_{
@@ -124,9 +122,6 @@ typedef struct {
     float normal_voltage_low;
     float normal_voltage_high;
     bool power;
-    bool keyphase;
-    int keyphase_slot;
-    int keyphase_ch;
 } SeismicMonitor;
 
 typedef enum {

mainwindow.cpp

@@ -591,7 +591,17 @@ void MainWindow::on_pushButton_save_clicked() {
 
 void MainWindow::on_pushButton_open_clicked() {
 
-
+    map_slot_config.clear();
+    QList<QAbstractButton *> buttonList = btnGroup_slot->buttons();
+    for (int i = 0; i < buttonList.count(); i++) {
+        buttonList[i]->setText("");
+    }
+    for (int i = 0; i < SLOT_NUM; i++) {
+        std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(i + 1);
+        if(base_ptr != nullptr){
+            ConfigMgr::Instance()->RemoveCard(base_ptr);
+        }
+    }
     tsi_config_file = QFileDialog::getOpenFileName(this, tr("选择文件"), tr(""), tr("*.json"));
     QFileInfo fileinfo;
     fileinfo = QFileInfo(tsi_config_file);
@@ -605,16 +615,6 @@ void MainWindow::on_pushButton_open_clicked() {
         qWarning() << "Failed to open update file.";
         return;
     }
-    QList<QAbstractButton *> buttonList = btnGroup_slot->buttons();
-    for (int i = 0; i < buttonList.count(); i++) {
-        buttonList[i]->setText("");
-    }
-    for (int i = 0; i < SLOT_NUM; i++) {
-        std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(i + 1);
-        if(base_ptr != nullptr){
-            ConfigMgr::Instance()->RemoveCard(base_ptr);
-        }
-    }
     ConfigMgr::Instance()->Load(tsi_config_file);
     for (int i = 0; i < buttonList.count(); i++) {
         std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(i + 1);

rangeslider.cpp

@@ -10,7 +10,7 @@ RangeSlider::RangeSlider(int style_,QWidget *parent)
     style = style_;
 }
 
-void RangeSlider::setRange(float min, float max) {
+void RangeSlider::setRange(int min, int max) {
     m_min = min;
     m_max = max;
     m_lower = qBound(m_min, m_lower, m_max);

rangeslider.h

@@ -9,7 +9,7 @@ class RangeSlider : public QWidget {
 public:
     explicit RangeSlider(int style_ = 0,QWidget *parent = nullptr);
 
-    void setRange(float min, float max);
+    void setRange(int min, int max);
     void setSliderWidth(int width);  // 新增方法：设置宽度
     float lowerValue() const;
     float upperValue() const;

seismic_monitor.cpp

@@ -12,7 +12,6 @@
 #include "data_config.h"
 #include "config_mgr.h"
 #include "vibrationdata.h"
-#include "trust.h"
 
 Seismic_monitor::Seismic_monitor(int slot,int cardtype, QWidget *parent) :
     QWidget(parent),
@@ -49,7 +48,6 @@ void Seismic_monitor::Init() {
 //        ui->comboBox_transducer_name_3->addItem(vec_transducer[var].transducer_name);
 //        ui->comboBox_transducer_name_4->addItem(vec_transducer[var].transducer_name);
 //    }
-    int slot = 0;
     std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
     if (base_ptr == nullptr) {
         qDebug() << "base_ptr";
@@ -61,18 +59,6 @@ void Seismic_monitor::Init() {
         UpdateData(vib_data);
         return;
     }
-    for (int i = 0; i < SLOT_NUM; ++i) {
-        if (ConfigMgr::Instance()->card_type_[i] == kCardNone) {
-            continue;
-        }
-        QJsonObject card_item;
-        slot = i + 1;
-        card_item["type"] = ConfigMgr::Instance()->card_type_[i];
-        card_item["slot"] = slot;
-        if (ConfigMgr::Instance()->card_type_[i] == kCardKeyphaseSingle ) {
-            ui->comboBox_keyphase_slot->addItem(QString::number(slot));
-        }
-    }
     std::shared_ptr<VibrationData> vib_data = std::dynamic_pointer_cast<VibrationData>(base_ptr);
     for (int i = 0; i < CHANNEL_COUNT; i++) {
         if (i + 1 == 1) {
@@ -132,9 +118,6 @@ void Seismic_monitor::UpdateData(std::shared_ptr<VibrationData> vib_data) {
             vib_data->base_config_[var].normal_voltage_high = ui->doubleSpinBox_high_1->value();
             vib_data->base_config_[var].power = ui->checkBox_power_1->isChecked();
             vib_data->base_config_[var].chan_id = QString("S%1C%2").arg(QString::number(slot_no, 10).rightJustified(2, '0')).arg(QString::number(var+1, 10).rightJustified(2, '0'));
-            vib_data->base_config_[var].keyphase = ui->checkBox_keyphase->isChecked();
-            vib_data->base_config_[var].keyphase_slot = ui->comboBox_keyphase_slot->currentText().toInt();
-            vib_data->base_config_[var].keyphase_ch = ui->comboBox_keyphase_ch->currentText().toInt();
         } else if (var + 1 == 2) {
             vib_data->base_config_[var].standby = ui->checkBox_standby_1->isChecked();
             vib_data->base_config_[var].active = ui->checkBox_enable_2->isChecked();
@@ -147,9 +130,6 @@ void Seismic_monitor::UpdateData(std::shared_ptr<VibrationData> vib_data) {
             vib_data->base_config_[var].normal_voltage_high = ui->doubleSpinBox_high_2->value();
             vib_data->base_config_[var].power = ui->checkBox_power_2->isChecked();
             vib_data->base_config_[var].chan_id = QString("S%1C%2").arg(QString::number(slot_no, 10).rightJustified(2, '0')).arg(QString::number(var+1, 10).rightJustified(2, '0'));
-            vib_data->base_config_[var].keyphase = ui->checkBox_keyphase_2->isChecked();
-            vib_data->base_config_[var].keyphase_slot = ui->comboBox_keyphase_slot_2->currentText().toInt();
-            vib_data->base_config_[var].keyphase_ch = ui->comboBox_keyphase_ch_2->currentText().toInt();
         } else if (var + 1 == 3) {
             vib_data->base_config_[var].standby = ui->checkBox_standby_2->isChecked();
             vib_data->base_config_[var].active = ui->checkBox_enable_3->isChecked();
@@ -162,9 +142,6 @@ void Seismic_monitor::UpdateData(std::shared_ptr<VibrationData> vib_data) {
             vib_data->base_config_[var].normal_voltage_high = ui->doubleSpinBox_high_3->value();
             vib_data->base_config_[var].power = ui->checkBox_power_3->isChecked();
             vib_data->base_config_[var].chan_id = QString("S%1C%2").arg(QString::number(slot_no, 10).rightJustified(2, '0')).arg(QString::number(var+1, 10).rightJustified(2, '0'));
-            vib_data->base_config_[var].keyphase = ui->checkBox_keyphase_3->isChecked();
-            vib_data->base_config_[var].keyphase_slot = ui->comboBox_keyphase_slot_3->currentText().toInt();
-            vib_data->base_config_[var].keyphase_ch = ui->comboBox_keyphase_ch_3->currentText().toInt();
         } else if (var + 1 == 4) {
             vib_data->base_config_[var].standby = ui->checkBox_standby_2->isChecked();
             vib_data->base_config_[var].active = ui->checkBox_enable_4->isChecked();
@@ -177,9 +154,6 @@ void Seismic_monitor::UpdateData(std::shared_ptr<VibrationData> vib_data) {
             vib_data->base_config_[var].normal_voltage_high = ui->doubleSpinBox_high_4->value();
             vib_data->base_config_[var].power = ui->checkBox_power_4->isChecked();
             vib_data->base_config_[var].chan_id = QString("S%1C%2").arg(QString::number(slot_no, 10).rightJustified(2, '0')).arg(QString::number(var+1, 10).rightJustified(2, '0'));
-            vib_data->base_config_[var].keyphase = ui->checkBox_keyphase_4->isChecked();
-            vib_data->base_config_[var].keyphase_slot = ui->comboBox_keyphase_slot_4->currentText().toInt();
-            vib_data->base_config_[var].keyphase_ch = ui->comboBox_keyphase_ch_4->currentText().toInt();
         }
     }
 }
@@ -215,10 +189,6 @@ void Seismic_monitor::on_pushButton_config_1_clicked() {
         Velocity *velocity = new Velocity(slot_no, channel, ui->checkBox_enable_1->isChecked());
         velocity->setWindowModality(Qt::ApplicationModal);
         velocity->show();
-    }else if (ui->comboBox_chan_type_1->currentIndex() == kVibThrust) {
-        Trust *trust = new Trust(slot_no, channel, ui->checkBox_enable_1->isChecked());
-        trust->setWindowModality(Qt::ApplicationModal);
-        trust->show();
     }
 }
 
@@ -236,10 +206,6 @@ void Seismic_monitor::on_pushButton_config_2_clicked() {
         Velocity *velocity = new Velocity(slot_no, channel, ui->checkBox_enable_2->isChecked());
         velocity->setWindowModality(Qt::ApplicationModal);
         velocity->show();
-    }else if (ui->comboBox_chan_type_2->currentIndex() == kVibThrust) {
-        Trust *trust = new Trust(slot_no, channel, ui->checkBox_enable_1->isChecked());
-        trust->setWindowModality(Qt::ApplicationModal);
-        trust->show();
     }
 }
 
@@ -257,10 +223,6 @@ void Seismic_monitor::on_pushButton_config_3_clicked() {
         Velocity *velocity = new Velocity(slot_no, channel, ui->checkBox_enable_3->isChecked());
         velocity->setWindowModality(Qt::ApplicationModal);
         velocity->show();
-    }else if (ui->comboBox_chan_type_3->currentIndex() == kVibThrust) {
-        Trust *trust = new Trust(slot_no, channel, ui->checkBox_enable_1->isChecked());
-        trust->setWindowModality(Qt::ApplicationModal);
-        trust->show();
     }
 }
 
@@ -278,10 +240,6 @@ void Seismic_monitor::on_pushButton_config_4_clicked() {
         Velocity *velocity = new Velocity(slot_no, channel, ui->checkBox_enable_4->isChecked());
         velocity->setWindowModality(Qt::ApplicationModal);
         velocity->show();
-    }else if (ui->comboBox_chan_type_4->currentIndex() == kVibThrust) {
-        Trust *trust = new Trust(slot_no, channel, ui->checkBox_enable_1->isChecked());
-        trust->setWindowModality(Qt::ApplicationModal);
-        trust->show();
     }
 }
 
@@ -296,9 +254,6 @@ void Seismic_monitor::on_comboBox_chan_type_1_currentTextChanged(const QString &
         case kVibVelocity:
             ui->label_unit_1->setText("mV / mm/s");
             break;
-        case kVibThrust:
-            ui->label_unit_1->setText("mV / mil");
-            break;
     }
 }
 
@@ -313,9 +268,6 @@ void Seismic_monitor::on_comboBox_chan_type_2_currentTextChanged(const QString &
         case kVibVelocity:
             ui->label_unit_2->setText("mV / mm/s");
             break;
-        case kVibThrust:
-            ui->label_unit_2->setText("mV / mil");
-            break;
     }
 }
 
@@ -330,9 +282,6 @@ void Seismic_monitor::on_comboBox_chan_type_3_currentTextChanged(const QString &
         case kVibVelocity:
             ui->label_unit_3->setText("mV / mm/s");
             break;
-        case kVibThrust:
-            ui->label_unit_3->setText("mV / mil");
-            break;
     }
 }
 
@@ -347,9 +296,6 @@ void Seismic_monitor::on_comboBox_chan_type_4_currentTextChanged(const QString &
         case kVibVelocity:
             ui->label_unit_4->setText("mV / mm/s");
             break;
-        case kVibThrust:
-            ui->label_unit_4->setText("mV / mil");
-            break;
     }
 }
 
@@ -388,45 +334,3 @@ void Seismic_monitor::on_comboBox_transducer_name_4_currentTextChanged(const QSt
         }
     }
 }
-void Seismic_monitor::EnableKeyphase(){
-    ui->checkBox_keyphase->setCheckable(true);
-    ui->checkBox_keyphase->setEnabled(true);
-    ui->comboBox_keyphase_ch->setEnabled(true);
-    ui->comboBox_keyphase_slot->setEnabled(true);
-
-    ui->checkBox_keyphase_2->setCheckable(true);
-    ui->checkBox_keyphase_2->setEnabled(true);
-    ui->comboBox_keyphase_ch_2->setEnabled(true);
-    ui->comboBox_keyphase_slot_2->setEnabled(true);
-
-    ui->checkBox_keyphase_3->setCheckable(true);
-    ui->checkBox_keyphase_3->setEnabled(true);
-    ui->comboBox_keyphase_ch_3->setEnabled(true);
-    ui->comboBox_keyphase_slot_3->setEnabled(true);
-
-    ui->checkBox_keyphase_4->setCheckable(true);
-    ui->checkBox_keyphase_4->setEnabled(true);
-    ui->comboBox_keyphase_ch_4->setEnabled(true);
-    ui->comboBox_keyphase_slot_4->setEnabled(true);
-}
-void Seismic_monitor::DisableKeyphase(){
-    ui->checkBox_keyphase->setCheckable(false);
-    ui->checkBox_keyphase->setEnabled(false);
-    ui->comboBox_keyphase_ch->setEnabled(false);
-    ui->comboBox_keyphase_slot->setEnabled(false);
-
-    ui->checkBox_keyphase_2->setCheckable(false);
-    ui->checkBox_keyphase_2->setEnabled(false);
-    ui->comboBox_keyphase_ch_2->setEnabled(false);
-    ui->comboBox_keyphase_slot_2->setEnabled(false);
-
-    ui->checkBox_keyphase_3->setCheckable(false);
-    ui->checkBox_keyphase_3->setEnabled(false);
-    ui->comboBox_keyphase_ch_3->setEnabled(false);
-    ui->comboBox_keyphase_slot_3->setEnabled(false);
-
-    ui->checkBox_keyphase_4->setCheckable(false);
-    ui->checkBox_keyphase_4->setEnabled(false);
-    ui->comboBox_keyphase_ch_4->setEnabled(false);
-    ui->comboBox_keyphase_slot_4->setEnabled(false);
-}

seismic_monitor.h

@@ -57,8 +57,6 @@ class Seismic_monitor : public QWidget {
 //    SeismicMonitor seismic_monitor[CHANNLE_COUNT];
     QVector<Transducer> vec_transducer;
     void Init();
-    void EnableKeyphase();
-    void DisableKeyphase();
 };
 
 #endif // SEISMIC_MONITOR_H

setpoint.cpp

@@ -191,45 +191,6 @@ void Setpoint::update()
         ui->label_direct->setText("um");
         ui->label_danger->setText("um");
 
-    }
-    if(setpoint_data->base_config_[chan].channel_type == kVibThrust){
-        ui->label_27->hide();
-        ui->label_1x->hide();
-        ui->lineEdit_1x_ampl_upper->hide();
-        ui->widget_1x_ampl->hide();
-        ui->lineEdit_1x_ampl_lower->hide();
-        ui->checkBox_1x_ampl->hide();
-
-        ui->label_32->hide();
-        ui->label_2x->hide();
-        ui->lineEdit_2x_ampl_upper->hide();
-        ui->widget_2x_ampl->hide();
-        ui->lineEdit_2x_ampl_lower->hide();
-        ui->checkBox_2x_ampl->hide();
-        ui->label_direct->setText("mil");
-        ui->label_danger->setText("mil");
-        if(variable_[chan]->direct_.full_scale_range == 0){
-            slider_direct->setRange(-25,25);
-            slider_danger->setRange(-25,25);
-        }else if(variable_[chan]->direct_.full_scale_range == 1){
-            slider_direct->setRange(-30,30);
-            slider_danger->setRange(-30,30);
-        }else if(variable_[chan]->direct_.full_scale_range == 2){
-            slider_direct->setRange(-40,40);
-            slider_danger->setRange(-40,40);
-        }else if(variable_[chan]->direct_.full_scale_range == 3){
-            ui->label_direct->setText("mm");
-            ui->label_danger->setText("mm");
-            slider_direct->setRange(-0.5,0.5);
-            slider_danger->setRange(-0.5,0.5);
-        }else if(variable_[chan]->direct_.full_scale_range == 4){
-            ui->label_direct->setText("mm");
-            ui->label_danger->setText("mm");
-            slider_direct->setRange(-1,1);
-            slider_danger->setRange(-1,1);
-        }
-
-
     }
     if(setpoint_data->base_config_[chan].channel_type == kVibAcc){
         std::shared_ptr<VariableBase> base_channel_ptr = setpoint_data->GetChannelPtr(chan + 1);

trust.cpp

@@ -1,145 +0,0 @@
-#include "trust.h"
-#include "ui_trust.h"
-#include <QFile>
-#include <QDebug>
-#include <QJsonDocument>
-#include <QJsonObject>
-#include <QJsonArray>
-
-#include "data_config.h"
-#include "vibrationdata.h"
-#include "config_mgr.h"
-
-Trust::Trust(int slot_no_, int channel_, bool active,QWidget *parent) :
-    QWidget(parent),
-    ui(new Ui::Trust)
-{
-    ui->setupUi(this);
-    slot_no = slot_no_;
-    channel = channel_;
-    QString chan = QString("%1").arg(channel);
-    QString slot = QString("%1").arg(slot_no);
-    ui->label_channel->setText(chan);
-    ui->label_slot->setText(slot);
-    if (active) {
-        ui->label_active->setText("（启用）");
-    } else {
-        ui->label_active->setText("（停用）");
-    }
-    Init();
-}
-
-Trust::~Trust()
-{
-    delete ui;
-}
-void Trust::Init() {
-    std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
-    if (base_ptr == nullptr) {
-        qCritical() << "[Radial::Init] should not be here";
-        return;
-    }
-    std::shared_ptr<VibrationData> ptr = std::dynamic_pointer_cast<VibrationData>(base_ptr);
-    if (ptr->base_config_[channel - 1].channel_type != kVibThrust) {
-        qDebug() << "[Radial::Init] channel type changes";
-        return;
-    }
-    std::shared_ptr<VariableBase> variable_base = ptr->GetChannelPtr(channel);
-    if (variable_base == nullptr) {
-        qDebug() << "[Radial::Init] no channel ptr";
-        return;
-    }
-    std::shared_ptr<ThrustVariable> variable_ptr = std::dynamic_pointer_cast<ThrustVariable>(variable_base);
-    ui->checkBox_low_pass->setChecked(variable_ptr->filter_[0].checked);
-    ui->spinBox_low_pass_low->setValue(variable_ptr->filter_[0].low);
-    ui->spinBox_low_pass_high->setValue(variable_ptr->filter_[0].high);
-    ui->checkBox_high_pass->setChecked(variable_ptr->filter_[1].checked);
-    ui->spinBox_high_pass_low->setValue(variable_ptr->filter_[1].low);
-    ui->spinBox_high_pass_high->setValue(variable_ptr->filter_[1].high);
-    ui->checkBox_band_pass->setChecked(variable_ptr->filter_[2].checked);
-    ui->spinBox_band_pass_low->setValue(variable_ptr->filter_[2].low);
-    ui->spinBox_band_pass_high->setValue(variable_ptr->filter_[2].high);
-    ui->comboBox_direct_value_range->setCurrentIndex(variable_ptr->direct_.full_scale_range);
-    ui->doubleSpinBox_direct_clamp->setValue(variable_ptr->direct_.clamp_value);
-    //    ui->label_bias_voltage->setText(QString::number(variable_ptr->direct_.bias_voltage));
-    //    ui->doubleSpinBox_bias_volt_clamp->setValue(variables[i].clamp_value);
-    //    ui->comboBox_bias_volt_range->setCurrentIndex();
-    ui->spinBox_alert->setValue(variable_ptr->delay_.alert);
-    ui->doubleSpinBox_danger->setValue(variable_ptr->delay_.danger);
-    ui->checkBox_100ms->setChecked(variable_ptr->delay_.active_100ms);
-    ui->checkBox_alert_latching->setChecked(variable_ptr->alert_latching_);
-    ui->checkBox_danger_latching->setChecked(variable_ptr->danger_latching_);
-    ui->comboBox_recorder_output->setCurrentIndex(variable_ptr->recorder_out_.recorder_output);
-    ui->checkBox_two_ma_clamp->setChecked(variable_ptr->recorder_out_.two_ma_clamp);
-}
-void Trust::on_pushButton_confirm_clicked()
-{
-    std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(slot_no);
-    if (base_ptr == nullptr) {
-        qCritical() << "[Radial::Init] should not be here";
-        return;
-    }
-    std::shared_ptr<VibrationData> ptr = std::dynamic_pointer_cast<VibrationData>(base_ptr);
-    std::shared_ptr<VariableBase> variable_base = ptr->GetChannelPtr(channel);
-    if (variable_base == nullptr || variable_base->type_ != kVibThrust) {
-        if (variable_base == nullptr) {
-            qDebug() << "no channel ptr";
-        } else {
-            ptr->RemoveChannel(channel);
-            qDebug() << "channel type change";
-        }
-        std::shared_ptr<ThrustVariable> variable = std::make_shared<ThrustVariable>();
-        variable->id_ = channel;
-        variable->type_ = kVibThrust;
-        variable->filter_[0].checked = ui->checkBox_low_pass->isChecked();
-        variable->filter_[0].low = ui->spinBox_low_pass_low->value();
-        variable->filter_[0].high = ui->spinBox_low_pass_high->value();
-        variable->filter_[1].checked = ui->checkBox_high_pass->isChecked();
-        variable->filter_[1].low = ui->spinBox_high_pass_low->value();
-        variable->filter_[1].high = ui->spinBox_high_pass_high->value();
-        variable->filter_[2].checked = ui->checkBox_band_pass->isChecked();
-        variable->filter_[2].low = ui->spinBox_band_pass_low->value();
-        variable->filter_[2].high = ui->spinBox_band_pass_high->value();
-        variable->direct_.full_scale_range = ui->comboBox_direct_value_range->currentIndex();
-        variable->direct_.clamp_value = ui->doubleSpinBox_direct_clamp->value();
-        variable->direct_.custom = 0; // TODO:
-        variable->recorder_out_.recorder_output = ui->comboBox_recorder_output->currentIndex();
-        variable->recorder_out_.two_ma_clamp = ui->checkBox_two_ma_clamp->isChecked();
-        variable->delay_.alert = ui->spinBox_alert->value();
-        variable->delay_.danger = ui->doubleSpinBox_danger->value();
-        variable->delay_.active_100ms = ui->checkBox_100ms->isChecked();
-        variable->alert_latching_ = ui->checkBox_alert_latching->isChecked();
-        variable->danger_latching_ = ui->checkBox_danger_latching->isChecked();
-        ptr->variables_.push_back(variable);
-        this->close();
-        return;
-    }
-    std::shared_ptr<ThrustVariable> variable = std::dynamic_pointer_cast<ThrustVariable>(variable_base);
-    variable->filter_[0].checked = ui->checkBox_low_pass->isChecked();
-    variable->filter_[0].low = ui->spinBox_low_pass_low->value();
-    variable->filter_[0].high = ui->spinBox_low_pass_high->value();
-    variable->filter_[1].checked = ui->checkBox_high_pass->isChecked();
-    variable->filter_[1].low = ui->spinBox_high_pass_low->value();
-    variable->filter_[1].high = ui->spinBox_high_pass_high->value();
-    variable->filter_[2].checked = ui->checkBox_band_pass->isChecked();
-    variable->filter_[2].low = ui->spinBox_band_pass_low->value();
-    variable->filter_[2].high = ui->spinBox_band_pass_high->value();
-    variable->direct_.full_scale_range = ui->comboBox_direct_value_range->currentIndex();
-    variable->direct_.clamp_value = ui->doubleSpinBox_direct_clamp->value();
-    variable->direct_.custom = 0; // TODO:
-    variable->recorder_out_.recorder_output = ui->comboBox_recorder_output->currentIndex();
-    variable->recorder_out_.two_ma_clamp = ui->checkBox_two_ma_clamp->isChecked();
-    variable->delay_.alert = ui->spinBox_alert->value();
-    variable->delay_.danger = ui->doubleSpinBox_danger->value();
-    variable->delay_.active_100ms = ui->checkBox_100ms->isChecked();
-    variable->alert_latching_ = ui->checkBox_alert_latching->isChecked();
-    variable->danger_latching_ = ui->checkBox_danger_latching->isChecked();
-    this->close();
-}
-
-
-void Trust::on_pushButton_cancel_clicked()
-{
-
-}
-

trust.h

@@ -1,30 +0,0 @@
-#ifndef TRUST_H
-#define TRUST_H
-
-#include <QWidget>
-
-namespace Ui {
-class Trust;
-}
-
-class Trust : public QWidget
-{
-    Q_OBJECT
-
-public:
-    explicit Trust(int slot_no_, int channel_, bool active,QWidget *parent = nullptr);
-    ~Trust();
-    int slot_no;
-    int channel;
-
-private slots:
-    void on_pushButton_confirm_clicked();
-
-    void on_pushButton_cancel_clicked();
-
-private:
-    Ui::Trust *ui;
-    void Init();
-};
-
-#endif // TRUST_H

trust.ui

@@ -1,818 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<ui version="4.0">
- <class>Trust</class>
- <widget class="QWidget" name="Trust">
-  <property name="geometry">
-   <rect>
-    <x>0</x>
-    <y>0</y>
-    <width>691</width>
-    <height>505</height>
-   </rect>
-  </property>
-  <property name="windowTitle">
-   <string>Form</string>
-  </property>
-  <widget class="QTabWidget" name="tabWidget">
-   <property name="geometry">
-    <rect>
-     <x>10</x>
-     <y>60</y>
-     <width>651</width>
-     <height>381</height>
-    </rect>
-   </property>
-   <property name="currentIndex">
-    <number>1</number>
-   </property>
-   <widget class="QWidget" name="tab_5">
-    <attribute name="title">
-     <string>传感器和滤波配置</string>
-    </attribute>
-    <widget class="QGroupBox" name="groupBox_2">
-     <property name="geometry">
-      <rect>
-       <x>10</x>
-       <y>30</y>
-       <width>353</width>
-       <height>116</height>
-      </rect>
-     </property>
-     <property name="title">
-      <string>滤波</string>
-     </property>
-     <layout class="QVBoxLayout" name="verticalLayout">
-      <item>
-       <layout class="QHBoxLayout" name="horizontalLayout">
-        <item>
-         <widget class="QCheckBox" name="checkBox_high_pass">
-          <property name="text">
-           <string>高通：</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_high_pass_low">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="maximumSize">
-           <size>
-            <width>60</width>
-            <height>16777215</height>
-           </size>
-          </property>
-          <property name="minimum">
-           <number>3</number>
-          </property>
-          <property name="maximum">
-           <number>3000</number>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_33">
-          <property name="text">
-           <string>-</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_high_pass_high">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="maximumSize">
-           <size>
-            <width>60</width>
-            <height>16777215</height>
-           </size>
-          </property>
-          <property name="minimum">
-           <number>3</number>
-          </property>
-          <property name="maximum">
-           <number>3000</number>
-          </property>
-          <property name="value">
-           <number>3000</number>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_32">
-          <property name="text">
-           <string>3 - 3000Hz</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <spacer name="horizontalSpacer">
-          <property name="orientation">
-           <enum>Qt::Horizontal</enum>
-          </property>
-          <property name="sizeHint" stdset="0">
-           <size>
-            <width>40</width>
-            <height>20</height>
-           </size>
-          </property>
-         </spacer>
-        </item>
-       </layout>
-      </item>
-      <item>
-       <layout class="QHBoxLayout" name="horizontalLayout_2">
-        <item>
-         <widget class="QCheckBox" name="checkBox_low_pass">
-          <property name="text">
-           <string>低通：</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_low_pass_low">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="maximumSize">
-           <size>
-            <width>60</width>
-            <height>16777215</height>
-           </size>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_30">
-          <property name="text">
-           <string>-</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_low_pass_high">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="maximumSize">
-           <size>
-            <width>60</width>
-            <height>16777215</height>
-           </size>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_29">
-          <property name="text">
-           <string>30 - 30000Hz</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <spacer name="horizontalSpacer_2">
-          <property name="orientation">
-           <enum>Qt::Horizontal</enum>
-          </property>
-          <property name="sizeHint" stdset="0">
-           <size>
-            <width>40</width>
-            <height>20</height>
-           </size>
-          </property>
-         </spacer>
-        </item>
-       </layout>
-      </item>
-      <item>
-       <layout class="QHBoxLayout" name="horizontalLayout_3">
-        <item>
-         <widget class="QCheckBox" name="checkBox_band_pass">
-          <property name="text">
-           <string>带通：</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_band_pass_low">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="minimum">
-           <number>3</number>
-          </property>
-          <property name="maximum">
-           <number>3000</number>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_34">
-          <property name="text">
-           <string>-</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QSpinBox" name="spinBox_band_pass_high">
-          <property name="minimumSize">
-           <size>
-            <width>60</width>
-            <height>0</height>
-           </size>
-          </property>
-          <property name="minimum">
-           <number>3</number>
-          </property>
-          <property name="maximum">
-           <number>3000</number>
-          </property>
-          <property name="value">
-           <number>3000</number>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QLabel" name="label_35">
-          <property name="text">
-           <string>3 - 3000Hz</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <spacer name="horizontalSpacer_3">
-          <property name="orientation">
-           <enum>Qt::Horizontal</enum>
-          </property>
-          <property name="sizeHint" stdset="0">
-           <size>
-            <width>40</width>
-            <height>20</height>
-           </size>
-          </property>
-         </spacer>
-        </item>
-       </layout>
-      </item>
-     </layout>
-    </widget>
-   </widget>
-   <widget class="QWidget" name="tab_6">
-    <attribute name="title">
-     <string>特征值和警报配置</string>
-    </attribute>
-    <widget class="QGroupBox" name="groupBox_11">
-     <property name="geometry">
-      <rect>
-       <x>20</x>
-       <y>10</y>
-       <width>411</width>
-       <height>321</height>
-      </rect>
-     </property>
-     <property name="title">
-      <string> 特征值</string>
-     </property>
-     <widget class="QLabel" name="label_71">
-      <property name="geometry">
-       <rect>
-        <x>20</x>
-        <y>50</y>
-        <width>54</width>
-        <height>12</height>
-       </rect>
-      </property>
-      <property name="text">
-       <string>直接值</string>
-      </property>
-     </widget>
-     <widget class="QLabel" name="label_72">
-      <property name="geometry">
-       <rect>
-        <x>20</x>
-        <y>80</y>
-        <width>81</width>
-        <height>16</height>
-       </rect>
-      </property>
-      <property name="text">
-       <string>间隙</string>
-      </property>
-     </widget>
-     <widget class="QLabel" name="label_73">
-      <property name="geometry">
-       <rect>
-        <x>141</x>
-        <y>31</y>
-        <width>48</width>
-        <height>16</height>
-       </rect>
-      </property>
-      <property name="text">
-       <string>取值范围</string>
-      </property>
-     </widget>
-     <widget class="QLabel" name="label_74">
-      <property name="geometry">
-       <rect>
-        <x>260</x>
-        <y>31</y>
-        <width>61</width>
-        <height>16</height>
-       </rect>
-      </property>
-      <property name="text">
-       <string>   默认值</string>
-      </property>
-     </widget>
-     <widget class="QComboBox" name="comboBox_direct_value_range">
-      <property name="geometry">
-       <rect>
-        <x>130</x>
-        <y>50</y>
-        <width>111</width>
-        <height>22</height>
-       </rect>
-      </property>
-      <property name="currentIndex">
-       <number>0</number>
-      </property>
-      <item>
-       <property name="text">
-        <string>25-0-25 mil</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>30-0-30 mil</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>40-0-40 mil</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0.5-0-0.5 mm</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>1.0-0-1.0 mm</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>自定义</string>
-       </property>
-      </item>
-     </widget>
-     <widget class="QDoubleSpinBox" name="doubleSpinBox_direct_clamp">
-      <property name="geometry">
-       <rect>
-        <x>260</x>
-        <y>50</y>
-        <width>62</width>
-        <height>22</height>
-       </rect>
-      </property>
-      <property name="decimals">
-       <number>0</number>
-      </property>
-      <property name="maximum">
-       <double>1000.000000000000000</double>
-      </property>
-     </widget>
-     <widget class="QDoubleSpinBox" name="doubleSpinBox_gap_clamp">
-      <property name="geometry">
-       <rect>
-        <x>260</x>
-        <y>80</y>
-        <width>62</width>
-        <height>22</height>
-       </rect>
-      </property>
-      <property name="decimals">
-       <number>1</number>
-      </property>
-     </widget>
-     <widget class="QComboBox" name="comboBox_gap_range">
-      <property name="geometry">
-       <rect>
-        <x>130</x>
-        <y>80</y>
-        <width>111</width>
-        <height>22</height>
-       </rect>
-      </property>
-      <property name="currentIndex">
-       <number>0</number>
-      </property>
-      <item>
-       <property name="text">
-        <string>-24 Vdc</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0-100 um</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0-150 um</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0-200 um</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0-400 um</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>0-500 um</string>
-       </property>
-      </item>
-      <item>
-       <property name="text">
-        <string>自定义</string>
-       </property>
-      </item>
-     </widget>
-     <widget class="QGroupBox" name="groupBox_12">
-      <property name="geometry">
-       <rect>
-        <x>10</x>
-        <y>190</y>
-        <width>221</width>
-        <height>101</height>
-       </rect>
-      </property>
-      <property name="title">
-       <string> 延时</string>
-      </property>
-      <widget class="QLabel" name="label_78">
-       <property name="geometry">
-        <rect>
-         <x>20</x>
-         <y>20</y>
-         <width>54</width>
-         <height>12</height>
-        </rect>
-       </property>
-       <property name="text">
-        <string> 告警</string>
-       </property>
-      </widget>
-      <widget class="QLabel" name="label_79">
-       <property name="geometry">
-        <rect>
-         <x>20</x>
-         <y>50</y>
-         <width>54</width>
-         <height>12</height>
-        </rect>
-       </property>
-       <property name="text">
-        <string> 危险</string>
-       </property>
-      </widget>
-      <widget class="QDoubleSpinBox" name="doubleSpinBox_danger">
-       <property name="geometry">
-        <rect>
-         <x>60</x>
-         <y>50</y>
-         <width>61</width>
-         <height>21</height>
-        </rect>
-       </property>
-       <property name="decimals">
-        <number>1</number>
-       </property>
-       <property name="minimum">
-        <double>1.000000000000000</double>
-       </property>
-       <property name="maximum">
-        <double>99.900000000000006</double>
-       </property>
-      </widget>
-      <widget class="QCheckBox" name="checkBox_100ms">
-       <property name="geometry">
-        <rect>
-         <x>60</x>
-         <y>80</y>
-         <width>71</width>
-         <height>16</height>
-        </rect>
-       </property>
-       <property name="text">
-        <string>100 ms</string>
-       </property>
-      </widget>
-      <widget class="QLabel" name="label_80">
-       <property name="geometry">
-        <rect>
-         <x>130</x>
-         <y>20</y>
-         <width>54</width>
-         <height>12</height>
-        </rect>
-       </property>
-       <property name="text">
-        <string>1 - 60s</string>
-       </property>
-      </widget>
-      <widget class="QLabel" name="label_81">
-       <property name="geometry">
-        <rect>
-         <x>130</x>
-         <y>50</y>
-         <width>71</width>
-         <height>16</height>
-        </rect>
-       </property>
-       <property name="text">
-        <string>1.0 - 60.0s</string>
-       </property>
-      </widget>
-      <widget class="QSpinBox" name="spinBox_alert">
-       <property name="geometry">
-        <rect>
-         <x>60</x>
-         <y>20</y>
-         <width>61</width>
-         <height>21</height>
-        </rect>
-       </property>
-       <property name="minimum">
-        <number>1</number>
-       </property>
-      </widget>
-     </widget>
-    </widget>
-    <widget class="QCheckBox" name="checkBox_alert_latching">
-     <property name="geometry">
-      <rect>
-       <x>470</x>
-       <y>20</y>
-       <width>131</width>
-       <height>16</height>
-      </rect>
-     </property>
-     <property name="text">
-      <string>告警锁定</string>
-     </property>
-    </widget>
-    <widget class="QCheckBox" name="checkBox_danger_latching">
-     <property name="geometry">
-      <rect>
-       <x>470</x>
-       <y>40</y>
-       <width>131</width>
-       <height>16</height>
-      </rect>
-     </property>
-     <property name="text">
-      <string>危险锁定</string>
-     </property>
-    </widget>
-    <widget class="QLabel" name="label_84">
-     <property name="geometry">
-      <rect>
-       <x>460</x>
-       <y>130</y>
-       <width>54</width>
-       <height>12</height>
-      </rect>
-     </property>
-     <property name="text">
-      <string>记录输出</string>
-     </property>
-    </widget>
-    <widget class="QComboBox" name="comboBox_recorder_output">
-     <property name="geometry">
-      <rect>
-       <x>460</x>
-       <y>150</y>
-       <width>141</width>
-       <height>22</height>
-      </rect>
-     </property>
-     <item>
-      <property name="text">
-       <string>无</string>
-      </property>
-     </item>
-     <item>
-      <property name="text">
-       <string>直接幅值</string>
-      </property>
-     </item>
-     <item>
-      <property name="text">
-       <string>间隙</string>
-      </property>
-     </item>
-    </widget>
-    <widget class="QCheckBox" name="checkBox_two_ma_clamp">
-     <property name="geometry">
-      <rect>
-       <x>460</x>
-       <y>180</y>
-       <width>91</width>
-       <height>16</height>
-      </rect>
-     </property>
-     <property name="text">
-      <string>2 mA 默认值</string>
-     </property>
-     <property name="checked">
-      <bool>true</bool>
-     </property>
-    </widget>
-    <widget class="QCheckBox" name="checkBox_timed_ok">
-     <property name="geometry">
-      <rect>
-       <x>470</x>
-       <y>60</y>
-       <width>181</width>
-       <height>16</height>
-      </rect>
-     </property>
-     <property name="text">
-      <string> Timed OK channel Defeat</string>
-     </property>
-    </widget>
-   </widget>
-  </widget>
-  <widget class="QWidget" name="layoutWidget">
-   <property name="geometry">
-    <rect>
-     <x>21</x>
-     <y>10</y>
-     <width>105</width>
-     <height>17</height>
-    </rect>
-   </property>
-   <layout class="QHBoxLayout" name="horizontalLayout_4">
-    <item>
-     <widget class="QLabel" name="label_58">
-      <property name="text">
-       <string>通道：</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QLabel" name="label_channel">
-      <property name="text">
-       <string>1</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QLabel" name="label_active">
-      <property name="text">
-       <string>（启用）</string>
-      </property>
-     </widget>
-    </item>
-   </layout>
-  </widget>
-  <widget class="QWidget" name="layoutWidget_2">
-   <property name="geometry">
-    <rect>
-     <x>20</x>
-     <y>450</y>
-     <width>632</width>
-     <height>37</height>
-    </rect>
-   </property>
-   <layout class="QHBoxLayout" name="horizontalLayout_6">
-    <item>
-     <widget class="QPushButton" name="pushButton_confirm">
-      <property name="minimumSize">
-       <size>
-        <width>100</width>
-        <height>35</height>
-       </size>
-      </property>
-      <property name="text">
-       <string>确定</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QPushButton" name="pushButton_set_default">
-      <property name="enabled">
-       <bool>false</bool>
-      </property>
-      <property name="minimumSize">
-       <size>
-        <width>100</width>
-        <height>35</height>
-       </size>
-      </property>
-      <property name="text">
-       <string>设置为默认值</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QPushButton" name="pushButton_cancel">
-      <property name="minimumSize">
-       <size>
-        <width>100</width>
-        <height>35</height>
-       </size>
-      </property>
-      <property name="text">
-       <string>取消</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QPushButton" name="pushButton_print">
-      <property name="enabled">
-       <bool>false</bool>
-      </property>
-      <property name="minimumSize">
-       <size>
-        <width>100</width>
-        <height>35</height>
-       </size>
-      </property>
-      <property name="text">
-       <string>打印</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QPushButton" name="pushButton_help">
-      <property name="enabled">
-       <bool>false</bool>
-      </property>
-      <property name="minimumSize">
-       <size>
-        <width>100</width>
-        <height>35</height>
-       </size>
-      </property>
-      <property name="text">
-       <string>帮助</string>
-      </property>
-     </widget>
-    </item>
-   </layout>
-  </widget>
-  <widget class="QWidget" name="layoutWidget_3">
-   <property name="geometry">
-    <rect>
-     <x>341</x>
-     <y>10</y>
-     <width>63</width>
-     <height>17</height>
-    </rect>
-   </property>
-   <layout class="QHBoxLayout" name="horizontalLayout_5">
-    <item>
-     <widget class="QLabel" name="label_57">
-      <property name="text">
-       <string>槽位号：</string>
-      </property>
-     </widget>
-    </item>
-    <item>
-     <widget class="QLabel" name="label_slot">
-      <property name="text">
-       <string>3</string>
-      </property>
-     </widget>
-    </item>
-   </layout>
-  </widget>
- </widget>
- <resources/>
- <connections/>
-</ui>

trust_ds.h

@@ -1,22 +0,0 @@
-#ifndef TRUST_DS_H
-#define TRUST_DS_H
-
-// 位移峰峰值的量程范围
-typedef enum {
-    kDisPP25 = 0, // 25-0-25 mil
-    kDisPP30 = 1, // 30-0-30 mil
-    kDisPP40 = 2, // 40-0-40 mil
-    kDisPP0p5 = 3, // 0.5-0-0.5 mm
-    kDisPP1p0 = 4, // 1.0-0-1.0 mm
-    kDisPPCustom = 5 // custom
-} DisPPFullScaleRange;
-
-// recorder out
-typedef enum {
-    kDisRecorderOutNone = 0,
-    kDisRecorderOutDirectAmpl = 1,
-    kDisRecorderOutGap = 2
-} DisRecorderOut;
-
-
-#endif // TRUST_DS_H