diff --git a/MyTcpClient.cpp b/MyTcpClient.cpp
index caed475..24d327e 100644
--- a/MyTcpClient.cpp
+++ b/MyTcpClient.cpp
@@ -95,7 +95,6 @@ void MyTcpClient::onReadyRead() {
         } else {
             // 2. 根据头部的 len 读取剩余数据
             qint64 remainingBytes = m_currentHead.len - (m_buffer.size() - sizeof(PackageHead));
-
             if (remainingBytes <= 0) {
                 // 数据已经完整，触发信号
                 emit dataReceived(m_buffer);
diff --git a/connect.cpp b/connect.cpp
index 654ef41..1721bce 100644
--- a/connect.cpp
+++ b/connect.cpp
@@ -26,5 +26,6 @@ void Connect::on_pushButton_connect_clicked()
     m_tcpClient = MyTcpClient::instance();
     // 连接服务器
     m_tcpClient->connectToServer(g_strServerIp, 10000);
+    this->close();
 }
 
diff --git a/data_config.h b/data_config.h
index 644e698..be9540e 100644
--- a/data_config.h
+++ b/data_config.h
@@ -12,7 +12,7 @@ extern QString g_strServerIp;             // 服务端IP
 
 #define SLOT_NUM  15
 #define CHANNEL_COUNT 4
-#define RELAY_COUNT 8
+#define RELAY_COUNT 16
 
 typedef enum {
     kCardNone = 0,
@@ -285,7 +285,7 @@ typedef struct TMRRelay_{
 typedef struct {
     uint8_t head[3];  // 固定值：0xAA55AA
     uint8_t cmd;      // 命令
-    int     len;          // 数据长度
+    int     len;      // 数据长度
     uint8_t crc;      // 数据 CRC 校验和
     char data[0];     // 文件内容
 } PackageHead;
diff --git a/mainwindow.cpp b/mainwindow.cpp
index fbe3171..20661cb 100644
--- a/mainwindow.cpp
+++ b/mainwindow.cpp
@@ -37,6 +37,7 @@ MainWindow::MainWindow(QWidget *parent)
 //    this->setMenuBar(menuBar);  //添加到对象树
 //    menuBar->addMenu(ui->menu_start);
     current_slot = -1;
+    tsi_config_file = "";
     ui->widget_body->setProperty("flag", "title");
     ui->menuBar->setProperty("flag", "menuBar");
     //关联事件过滤器用于双击放大
@@ -99,7 +100,7 @@ MainWindow::MainWindow(QWidget *parent)
 
     QSettings settingsread(QCoreApplication::applicationDirPath() + "\\config\\config.ini", QSettings::IniFormat);
     g_strServerIp = settingsread.value("Server/IP").toString();
-    //connectServer();
+    connectServer();
     // 设置自定义日志处理函数
 #ifndef QT_DEBUG
     //qInstallMessageHandler(messageHandler);
@@ -127,8 +128,6 @@ void MainWindow::connectServer() {
     connect(m_tcpClient, SIGNAL(disconnected()), this, SLOT(onDisConnected()));
     connect(m_tcpClient, SIGNAL(connected()), this, SLOT(onConnected()));
     connect(m_tcpClient, SIGNAL(errorOccurred(const QString &)), this, SLOT(onerrorOccurred(const QString &)));
-    // 连接服务器
-    //m_tcpClient->connectToServer(g_strServerIp, 10000);
 }
 
 void MainWindow::initStyle() {
@@ -573,73 +572,25 @@ void MainWindow::on_pushButton_save_clicked() {
     QString file_name = filepath + "\\tsi_config_file.json";
     ConfigMgr::Instance()->Save(file_name);
     return;
-    // 读取文件内容
-    QFile file(file_name);
-    if (!file.open(QIODevice::ReadOnly)) {
-        qWarning() << "Failed to open update file.";
-        return;
-    }
-    QByteArray fileData = file.readAll();
-    int fileSize = fileData.size();
-    if (fileSize > 10 * 1024 * 1024) {
-        QMessageBox::information(this, QStringLiteral("提示"), "文件大小超过10M，请重新选择！");
-        file.close();
-        return;
-    }
-    qDebug() << "fileSize" << fileSize  ;
-    // 创建 PackageHead 结构体
-    PackageHead header = { {0xAA, 0x55, 0xAA}, kUploadConfigFile, fileSize, 0, {} };
-    // 计算文件的 CRC 校验和
-    header.crc = calculate_crc(0, fileData);
-    header.len = fileSize;
-    char *send_buf = NULL;
-    send_buf = (char *)malloc(sizeof(PackageHead) + fileData.size() + 1);
-    memset(send_buf, 0, sizeof(PackageHead) + fileData.size() + 1);
-    memcpy(send_buf, &header, sizeof(PackageHead));
-    memcpy(send_buf + sizeof(PackageHead), fileData.data(), fileData.size());
-    int length = sizeof(PackageHead) + fileData.size();
-    const int MAX_CHUNK_SIZE = 50 * 1024;  // 50 KB
-    qint64 bytesSent = 0;
-    qint64 totalBytes = length;
-    qDebug() << "totalBytes" << totalBytes   ;
-    while (bytesSent < totalBytes) {
-        qint64 chunkSize = 0;
-        if (MAX_CHUNK_SIZE < totalBytes - bytesSent) {
-            chunkSize = MAX_CHUNK_SIZE;
-        } else {
-            chunkSize = totalBytes - bytesSent;
-        }
-        qint64 bytesWritten = m_tcpClient->sendData(send_buf + bytesSent, chunkSize);
-        qDebug() << "bytesWritten" << bytesWritten << "bytesSent" << bytesSent  << "chunkSize" << chunkSize ;
-        if (bytesWritten == -1) {
-            break;
-        }
-        bytesSent += bytesWritten;
-    }
-    qDebug() << "bytesSent" << bytesSent;
-    m_tcpClient->waitForRead();
-    file.close();
-    if (send_buf != NULL) {
-        free(send_buf);
-    }
+
 }
 
 void MainWindow::on_pushButton_open_clicked() {
 
-    QString filepath = QFileDialog::getOpenFileName(this, tr("选择文件"), tr(""), tr("*.json"));
+    tsi_config_file = QFileDialog::getOpenFileName(this, tr("选择文件"), tr(""), tr("*.json"));
     QFileInfo fileinfo;
-    fileinfo = QFileInfo(filepath);
+    fileinfo = QFileInfo(tsi_config_file);
     QString file_suffix = fileinfo.suffix();
     QString FileName = fileinfo.fileName();
     if (FileName.isEmpty()) {
         return;
     }
-    QFile file(filepath);
+    QFile file(tsi_config_file);
     if (!file.open(QIODevice::ReadOnly)) {
         qWarning() << "Failed to open update file.";
         return;
     }
-    ConfigMgr::Instance()->Load(filepath);
+    ConfigMgr::Instance()->Load(tsi_config_file);
     QList<QAbstractButton *> buttonList = btnGroup_slot->buttons();
     for (int i = 0; i < buttonList.count(); i++) {
         std::shared_ptr<CardBase> base_ptr = ConfigMgr::Instance()->GetSlotPtr(i + 1);
@@ -813,7 +764,7 @@ void MainWindow::readData(const QByteArray &data) {
         config_file = (char*)malloc(header.len + 1);
         memset(config_file,0,header.len + 1);
         memcpy(config_file, data.data() + sizeof(PackageHead), header.len);
-        QString filename_ = QCoreApplication::applicationDirPath() + "\\config\\tsi_config_file2.json";
+        QString filename_ = QCoreApplication::applicationDirPath() + "\\config\\tsi_config_file_download.json";
         //qDebug() << config_file ;
         QFile file(filename_);
         file.open(QIODevice::WriteOnly);
@@ -854,3 +805,68 @@ void MainWindow::onMACConfig(){
     mac_config->setWindowModality(Qt::ApplicationModal);
     mac_config->show();
 }
+
+void MainWindow::on_pushButton_upload_clicked()
+{
+    QMessageBox *box = new QMessageBox(QMessageBox::Question, "提示", "确认上传配置文件？", QMessageBox::Yes | QMessageBox::No, this);
+    box->button(QMessageBox::Yes)->setText("确认");
+    box->button(QMessageBox::No)->setText("取消");
+    int res = box->exec();
+    if(QMessageBox::No == res){
+        return;
+    }
+    // 读取文件内容
+    if(tsi_config_file == ""){
+        QMessageBox::information(this, QStringLiteral("提示"), "请先打开配置文件！");
+        return;
+    }
+    QFile file(tsi_config_file);
+    if (!file.open(QIODevice::ReadOnly)) {
+        qWarning() << "Failed to open config file.";
+        return;
+    }
+    QByteArray fileData = file.readAll();
+    int fileSize = fileData.size();
+    if (fileSize > 10 * 1024 * 1024) {
+        QMessageBox::information(this, QStringLiteral("提示"), "文件大小超过10M，请重新选择！");
+        file.close();
+        return;
+    }
+    qDebug() << "fileSize" << fileSize  ;
+    // 创建 PackageHead 结构体
+    PackageHead header = { {0xAA, 0x55, 0xAA}, kUploadConfigFile, fileSize, 0, {} };
+    // 计算文件的 CRC 校验和
+    header.crc = calculate_crc(0, fileData);
+    header.len = fileSize;
+    char *send_buf = NULL;
+    send_buf = (char *)malloc(sizeof(PackageHead) + fileData.size() + 1);
+    memset(send_buf, 0, sizeof(PackageHead) + fileData.size() + 1);
+    memcpy(send_buf, &header, sizeof(PackageHead));
+    memcpy(send_buf + sizeof(PackageHead), fileData.data(), fileData.size());
+    int length = sizeof(PackageHead) + fileData.size();
+    const int MAX_CHUNK_SIZE = 50 * 1024;  // 50 KB
+    qint64 bytesSent = 0;
+    qint64 totalBytes = length;
+    qDebug() << "totalBytes" << totalBytes   ;
+    while (bytesSent < totalBytes) {
+        qint64 chunkSize = 0;
+        if (MAX_CHUNK_SIZE < totalBytes - bytesSent) {
+            chunkSize = MAX_CHUNK_SIZE;
+        } else {
+            chunkSize = totalBytes - bytesSent;
+        }
+        qint64 bytesWritten = m_tcpClient->sendData(send_buf + bytesSent, chunkSize);
+        qDebug() << "bytesWritten" << bytesWritten << "bytesSent" << bytesSent  << "chunkSize" << chunkSize ;
+        if (bytesWritten == -1) {
+            break;
+        }
+        bytesSent += bytesWritten;
+    }
+    qDebug() << "bytesSent" << bytesSent;
+    m_tcpClient->waitForRead();
+    file.close();
+    if (send_buf != NULL) {
+        free(send_buf);
+    }
+}
+
diff --git a/mainwindow.h b/mainwindow.h
index 36bce57..238cce7 100644
--- a/mainwindow.h
+++ b/mainwindow.h
@@ -47,6 +47,7 @@ private:
     QProgressBar *progressBar;
     CardType card_type;
     int current_slot;
+    QString tsi_config_file;
 
     void createMenu();
     void createMenu(const QString& rootTitle, QPushButton* button = nullptr);
@@ -58,12 +59,13 @@ private:
     void getVersion(int slot);
     void initStyle();
     void connectServer();
-    void onerrorOccurred(const QString &errorMsg);
+
 private slots:
 
     void onDisConnected();
     void onConnected();
     void readData(const QByteArray&);
+    void onerrorOccurred(const QString &errorMsg);
     void onMenuAction_relay();
     void OnButtonGroup(QAbstractButton *);
     void onConnect();
@@ -79,5 +81,6 @@ private slots:
     void on_pushButton_save_clicked();
     void on_pushButton_open_clicked();
     void on_pushButton_download_clicked();
+    void on_pushButton_upload_clicked();
 };
 #endif // MAINWINDOW_H
diff --git a/mainwindow.ui b/mainwindow.ui
index 7ed79bc..ba40133 100644
--- a/mainwindow.ui
+++ b/mainwindow.ui
@@ -97,10 +97,10 @@
            <string>打开</string>
           </property>
          </widget>
-         <widget class="QPushButton" name="pushButton_22">
+         <widget class="QPushButton" name="pushButton_upload">
           <property name="geometry">
            <rect>
-            <x>200</x>
+            <x>140</x>
             <y>20</y>
             <width>45</width>
             <height>45</height>
@@ -119,13 +119,13 @@
            </size>
           </property>
           <property name="text">
-           <string/>
+           <string>上传</string>
           </property>
          </widget>
          <widget class="QPushButton" name="pushButton_download">
           <property name="geometry">
            <rect>
-            <x>140</x>
+            <x>190</x>
             <y>20</y>
             <width>45</width>
             <height>45</height>
diff --git a/radial_vibration.h b/radial_vibration.h
index adac59b..2a94031 100644
--- a/radial_vibration.h
+++ b/radial_vibration.h
@@ -22,9 +22,6 @@ class Radial : public QWidget {
 
     void on_checkBox_1x_ampl_toggled(bool checked);
     void on_checkBox_2x_ampl_toggled(bool checked);
-    void on_checkBox_not_1x_ampl_toggled(bool checked);
-    void on_checkBox_smax_ampl_toggled(bool checked);
-
   private:
     Ui::Radial_vibration *ui;