TSI_Config/data_config.h

#ifndef DATA_CONFIG_H
#define DATA_CONFIG_H
#include <QString>
#include <QPushButton>
#include <QLabel>
#include <QList>

typedef unsigned char      uint8_t;
typedef unsigned short     uint16_t;

extern QString g_strServerIp;             // 服务端IP

#define SLOT_NUM  15
#define CHANNEL_COUNT 4
#define RELAY_COUNT 16

typedef enum {
    kCardNone = 0,
    kCardCpu = 1,

    kCardVibSingle = 10,
    kCardVibTMRPrimary = 11,
    kCardVibTMRBackup = 12,
    kCardVibDoublePrimary = 13,
    kCardVibDoubleBackup = 14,

    kCardSpeedSingle = 20,
    kCardSpeedTMRPrimary = 21,
    kCardSpeedTMRBackup = 22,

    kCardKeyphaseSingle = 30,
    kCardKeyphaseDouble = 31,
    kCardRelaySingle = 32,
    kCardRelayTMRPrimary = 33,
    kCardRelayTMRBackup = 34,
    kCardRelaySingleNOK = 35,

} CardType;

// 振动板通道类型
typedef enum {
    kVibRadial = 0, // 径向位移
    kVibAcc = 1, // 加速度
    kVibVelocity = 2 // 速度
} VibChannelType;

typedef struct SlotConfig_{
    int slot;
    QString slot_type;
    QPushButton *slot_btn;
    QLabel *slot_label;
    SlotConfig_(){
        slot_type = "";
    }
} SlotConfig;

enum CMTCommand {
    kEigenvalueCmd = 1,
    kExceptionInfo = 2,
    kUpgradeCard = 3,
    kGetVersionInfo = 4,
    kRelaySetting = 5,
    kRelayStatus = 6,
    kUpgradeProgress = 7,
    kCalibrationMode = 8,
    kGetDcValue = 9,
    kSetCalibrationCoe = 10,
    kGetCalibrationCoe = 11,
    kClearCalibrationCoe = 12,
    kGetWaveData = 13,
    kUploadConfigFile = 14,
    kDownloadConfigFile = 15,
    kConfigSubCard = 16, // 请求无包体，响应有包体
    kRS485BaudrateSet = 17, // RS485波特率配置
    kRS485BaudrateGet = 18, // RS485波特率获取
    kConfigIPv4 = 19, // 配置IP地址
    kConfigMac = 20, // 配置Mac地址
    kRebootCard = 21, // 重启板卡
    kGetCardDcValue = 22, // 获取子板平均值
    kGetRelayStatus = 23, // 获取继电器状态
};
enum RS485Baudrate {
    kBaudrate2400 = 0,
    kBaudrate4800 = 1,
    kBaudrate9600 = 2, // 默认值
    kBaudrate19200 = 3,
    kBaudrate38400 = 4,
    kBaudrate57600 = 5,
    kBaudrate115200 = 6
};
// 振动板采样率
typedef enum {
    kVibSR16K = 0, // 16k
    kVibSR32K = 1, // 32k
    kVibSR64k = 2, // 64k
    kVibSR128K = 3, // 128k
} VibSamplingRate;

// 振动板机架类型
typedef enum {
    kVibRackSingle = 0, // 单一
    kVibRackTMR = 1 // 三冗余
} VibRackType;

typedef struct {
    int id;
    QString point_name;
    QString chan_id;
    bool standby;
    bool active;
    int rack_type; // VibRackType
//    char tmr_group[32];
    int channel_type; // VibChannelType
    int transducer_id;
    float scale_factor;
    int sampling_rate; // VibSamplingRate
    float normal_voltage_low;
    float normal_voltage_high;
    bool power;
} SeismicMonitor;

typedef enum {
    kFilterTypeLowPass = 0,
    kFilterTypeHighPass = 1,
    kFilterTypeBandPass = 2,
} FilterType;

typedef struct {
    int low;
    int high;
    bool checked;
} Filter;

//typedef struct {
//    Filter filter[3]; // 0: kFilterTypeLowPass, 1: kFilterTypeHighPass, 2: kFilterTypeBandPass
//} AllFilter;

typedef struct {
    QString type;
    int full_sacle_range;
    int bias_voltage;
    float clamp_value;
    int phase_lag;
    bool checked;
    float custom;
} Variables;

typedef struct {
    int full_scale_range;
    float clamp_value;
    float custom;
} DirectImpl;

typedef struct {
    bool checked;
    int full_scale_range;
    float clamp_value;
    float custom;
    int phase_lag;
} XImpl;

typedef struct {
    bool checked;
    int full_scale_range;
    float clamp_value;
    float custom;
} RadialImpl;

typedef struct {
    int alert;
    float danger;
    bool active_100ms;
} Delay;

typedef struct {
    bool rms_active;
    bool integrate_active;
    bool alert_latching;
    bool danger_latching;
    bool timed_ok;
    int  recorder_output;
    bool two_ma_clamp;
    float trip_multiply;
    QString comparision;
    int comparision_percentage;
} Alert_Variables;

typedef struct {
    int  recorder_output;
    bool two_ma_clamp;
    float trip_multiply;
    int comparision;
    int percentage;
} RecorderOut;

typedef struct {
    int id;
    bool active;
    float normal_voltage_low;
    float normal_voltage_high;
    int speed_peek;
    int default_speed;
    bool automatic_threshold;
    float threshold;
    float hysteresis;
    int events_per_revolution;
    int record_output;
    bool two_ma_clamp;
    bool alert_latching;
    bool overspeed_latching;
    bool normal_latching;
} TachometerVariables;

typedef struct {
    bool active;
    float normal_voltage_low;
    float normal_voltage_high;
    bool automatic_threshold;
    float threshold;
    float hysteresis;
    int events_per_revolution;
} KeyphaseVariables;

typedef struct {
    QString transducer_name;
    double scale_factor;
} Transducer;

typedef struct VibAlertDanger_{
    float direct_upper;
    bool direct_enable;
    float x1_ampl_upper;
    float x1_ampl_lower;
    bool x1_ampl_enable;
    float x2_ampl_upper;
    float x2_ampl_lower;
    bool x2_ampl_enable;
    int danger_param;   //0： 直接值，1： 1倍频幅值，2： 2倍频幅值
    float danger_upper;
    bool danger_enable;
    VibAlertDanger_(){
        direct_upper = 0.0;
        direct_enable = false;
        x1_ampl_upper = 0.0;
        x1_ampl_lower = 0.0;
        x1_ampl_enable = false;
        x2_ampl_upper = 0.0;
        x2_ampl_lower = 0.0;
        x2_ampl_enable = false;
        danger_upper = 0.0;
        danger_enable = false;
    }
} VibAlertDanger;

typedef struct SpeedAlert_{
    int speed_upper;
    int speed_lower;
    bool speed_upper_enable;
    bool speed_lower_enable;
    int danger_speed_upper;
    SpeedAlert_(){
        speed_upper = 0;
        speed_lower = 0;
        danger_speed_upper = 0;
        speed_upper_enable = false;
        speed_lower_enable = false;
    }
} SpeedAlert;

typedef struct SingleRelayNOK_{
    QString logic_expression;
    SingleRelayNOK_(){
        logic_expression = "";
    }
} SingleRelayNOK;

typedef struct TMRRelay_{
    QString logic_expression;
    TMRRelay_(){
        logic_expression = "";
    }
} TMRRelay;

#pragma pack(1)
// kUpgradeCard
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    int len;
    uint8_t card_id;
    uint8_t crc;
    char data[0];
} UpgradeCardReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code;    // 0: 上传成功
} UpgradeRsp;

// kUpgradeProgress
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t progress;
} UpgradeProgress;

// kGetVersionInfo
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t card_id;
} GetVersionReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t fpga;      // fpga版本号
    uint8_t sw;        // 软件版本号
    char fpga_date[9]; // fpga版本日期
} VersionRsp;
// kRelaySetting
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t card_id;     // 0xff是本机，其它子卡是1～15
    uint8_t led_id;      // ok 灯 0xff,rx/tx 灯 0xf1,板卡测试模式 0xee,板卡状态 0xe1,其他 1 ~ 16
    uint8_t led_operate; // 0 OFF,1 ON,2 红色,3 绿色,4 红色1Hz闪烁,5 红色2Hz闪烁,6 绿色闪烁,7 测试状态,8 手动状态,9 工作状态
} RelaySettingReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code;
} RelaySettingRsp;
// kRelayStatus
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t card_id;
} RelayStatusReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code; // 0: 成功  其它：失败
    uint8_t status; // 7 测试状态,8 手动状态,9 工作状态
} RelayStatusRsp;

// kUploadConfigFile
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    int len;
    uint8_t sub_cmd; // 0: 仅上传配置文件，不配置子板 1：配置所有子板
    uint8_t crc;
    char data[0];
} UploadConfigReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code; // 子板配置错误码
    uint8_t subcard_id; // 子板编号，从1开始
    uint8_t stage; // 0: 配置开始 1：配置结束
} UploadConfigProgress;
// kDownloadConfigFile
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
} DownloadConfigReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code;
    int len;
    uint8_t crc;
    char data[0];
} DownloadConfigRsp;

// kConfigSubCard
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t card_id;
} ConfigSubCardReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code; // 子板配置错误码
    uint8_t subcard_id; // 子板编号，从1开始
    uint8_t stage; // 0: 配置开始 1：配置结束
} ConfigSubCardProgress;
// kRS485BaudrateGet
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
} BaudrateGetReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t baudrate;
} BaudrateGetRsp;
//kRS485BaudrateSet
typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t baudrate;
} BaudrateSetReq;

typedef struct {
    uint8_t head[3]; // 固定值：0xAA55AA
    uint8_t cmd;
    uint8_t version; // 版本号，默认为1
    uint8_t code;
} BaudrateSetRsp;


#pragma pack()

#endif // DATA_CONFIG_H