all_info.csv

@@ -1,6 +0,0 @@
-IP地址,MAC地址,版本号,通道1名称，通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备

all_info2.csv

@@ -1,101 +0,0 @@
-IP地址,MAC地址,版本号,通道1名称，通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.20,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.41,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.61,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.81,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.101,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备

batch_dialog.py

@@ -1,357 +0,0 @@
-import os
-import sys
-import csv
-import socket, struct
-import time
-
-from PyQt5.QtWidgets import QApplication, QDialog, QVBoxLayout, QHBoxLayout, QTableWidget, QTableWidgetItem, \
-    QPushButton, QCheckBox, QFileDialog, QMessageBox
-from PyQt5.QtCore import Qt
-
-
-class BatchOperationDialog(QDialog):
-    def __init__(self):
-        super().__init__()
-        self.setWindowTitle("批量操作节点")
-        self.setGeometry(100, 100, 1093, 737)
-
-        # 初始化分页
-        self.current_page = 0
-        self.rows_per_page = 20
-
-        # 初始化数据
-        self.data = []
-
-        # 初始化UI
-        self.init_ui()
-
-    def init_ui(self):
-        # 主布局
-        main_layout = QVBoxLayout()
-
-        # 创建表格（8列，初始行数可以设置为20）
-        self.table_widget = QTableWidget(self.rows_per_page, 8)  # 默认显示20行
-        self.table_widget.setHorizontalHeaderLabels(
-            ["选择", "IP地址", "MAC地址", "版本号", "通道1名称", "通道1绑定设备", "通道2名称", "通道2绑定设备"]
-        )
-
-        # 使通道列可编辑
-        for row in range(self.table_widget.rowCount()):
-            self.table_widget.setItem(row, 4, QTableWidgetItem())  # 通道1名称
-            self.table_widget.setItem(row, 5, QTableWidgetItem())  # 通道1绑定设备
-            self.table_widget.setItem(row, 6, QTableWidgetItem())  # 通道2名称
-            self.table_widget.setItem(row, 7, QTableWidgetItem())  # 通道2绑定设备
-
-        # 添加勾选框到第1列
-        for row in range(self.table_widget.rowCount()):
-            check_box_item = QTableWidgetItem()
-            check_box_item.setCheckState(0)  # 初始状态为未选中
-            self.table_widget.setItem(row, 0, check_box_item)
-
-        # 按钮布局
-        button_layout = QHBoxLayout()
-
-        # 创建按钮
-        self.select_all_button = QPushButton("全选")
-        self.select_none_button = QPushButton("全不选")
-        self.get_version_button = QPushButton("获取版本")
-        self.get_mac_button = QPushButton("获取MAC")
-        self.upgrade_button = QPushButton("升级节点")
-        self.load_ips_button = QPushButton("加载IP列表")
-        self.load_all_button = QPushButton("加载完整信息列表")
-        self.save_button = QPushButton("保存表数据")
-        self.prev_page_button = QPushButton("上一页")
-        self.next_page_button = QPushButton("下一页")
-
-        # 按钮连接
-        self.select_all_button.clicked.connect(self.select_all)
-        self.select_none_button.clicked.connect(self.select_none)
-        self.get_version_button.clicked.connect(self.get_version)
-        self.get_mac_button.clicked.connect(self.get_mac)
-        self.upgrade_button.clicked.connect(self.upgrade_node)
-        self.save_button.clicked.connect(self.save_data)
-        self.load_ips_button.clicked.connect(self.load_ips)
-        self.load_all_button.clicked.connect(self.load_all_info)
-        self.prev_page_button.clicked.connect(self.prev_page)
-        self.next_page_button.clicked.connect(self.next_page)
-
-        # 将按钮加入布局
-        button_layout.addWidget(self.select_all_button)
-        button_layout.addWidget(self.select_none_button)
-        button_layout.addWidget(self.get_version_button)
-        button_layout.addWidget(self.get_mac_button)
-        button_layout.addWidget(self.upgrade_button)
-        button_layout.addWidget(self.load_ips_button)
-        button_layout.addWidget(self.load_all_button)
-        button_layout.addWidget(self.save_button)
-        button_layout.addWidget(self.prev_page_button)
-        button_layout.addWidget(self.next_page_button)
-
-        # 将表格和按钮布局添加到主布局
-        main_layout.addWidget(self.table_widget)
-        main_layout.addLayout(button_layout)
-
-        # 设置对话框的布局
-        self.setLayout(main_layout)
-
-        # 允许最大化
-        # self.setWindowState(Qt.WindowMaximized)
-
-    def select_all(self):
-        for row in range(self.table_widget.rowCount()):
-            item = self.table_widget.item(row, 0)
-            item.setCheckState(2)  # 选中
-
-    def select_none(self):
-        for row in range(self.table_widget.rowCount()):
-            item = self.table_widget.item(row, 0)
-            item.setCheckState(0)  # 未选中
-
-    def get_version(self):
-        # 遍历表格的第1列，获取选中的行的IP地址
-        for row in range(self.table_widget.rowCount()):
-            item = self.table_widget.item(row, 0)
-            if item.checkState() == Qt.Checked:  # 如果该行被选中
-                ip = self.table_widget.item(row, 1).text()  # 获取IP地址
-                if ip:
-                    try:
-                        # 创建TCP连接到IP地址的12345端口
-                        with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-                            s.settimeout(5)  # 设置连接超时时间为5秒
-                            s.connect((ip, 12345))
-
-                            # 发送消息
-                            message = bytes([0xAA, 0x55, 0xAA, 0x0F, 0x01, 0x00])
-                            s.sendall(message)
-
-                            # 接收返回的数据（假设返回数据至少有8个字节）
-                            response = s.recv(1024)
-                            if len(response) >= 8:
-                                # 解析第7、8字节作为版本号
-                                version = f"{response[6]}-{response[7]}"
-                                # 将版本号写入到第4列（版本号列）
-                                self.table_widget.setItem(row, 3, QTableWidgetItem(version))
-                            else:
-                                print(f"接收到的数据长度不足：{len(response)}，无法提取版本号")
-                    except Exception as e:
-                        print(f"与IP {ip} 连接失败: {e}")
-                        self.table_widget.setItem(row, 3, QTableWidgetItem("连接失败"))
-
-    def get_mac(self):
-        for row in range(self.table_widget.rowCount()):
-            item = self.table_widget.item(row, 0)
-            if item.checkState() == Qt.Checked:  # 如果该行被选中
-                ip = self.table_widget.item(row, 1).text()  # 获取IP地址
-                if ip:
-                    try:
-                        # 创建TCP连接到IP地址的12345端口
-                        with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-                            s.settimeout(5)  # 设置连接超时时间为5秒
-                            s.connect((ip, 12345))
-
-                            # 发送消息
-                            message = bytes([0xAA, 0x55, 0xAA, 0x12, 0x01, 0x00])
-                            s.sendall(message)
-
-                            # 接收返回的数据（假设返回数据至少有8个字节）
-                            response = s.recv(1024)
-                            if len(response) >= 8:
-                                # 解析第7、8字节作为mac后2字节
-                                mac = f"50-29-4D-20-{response[6]}-{response[7]}"
-                                # 将版本号写入到第3列（MAC列）
-                                self.table_widget.setItem(row, 2, QTableWidgetItem(mac))
-                            else:
-                                print(f"接收到的数据长度不足：{len(response)}，无法提取版本号")
-                    except Exception as e:
-                        print(f"与IP {ip} 连接失败: {e}")
-                        self.table_widget.setItem(row, 3, QTableWidgetItem("连接失败"))
-
-    def calculate_crc(self, data: bytes) -> int:
-        """计算数据的累加和CRC"""
-        crc = 0
-        for byte in data:
-            crc += byte
-        return crc & 0xFF  # 只保留最低字节
-
-    def upgrade_node(self):
-        """打开文件选择对话框"""
-        file_path, _ = QFileDialog.getOpenFileName(
-            self, "选择升级文件", "", "二进制文件 (*.bin);;所有文件 (*)"
-        )
-
-        if file_path:
-            file_name = os.path.basename(file_path)
-            # self.status_bar.showMessage(f"已选择: {file_name}")
-
-        try:
-            print("Starting upgrade process...")
-            if not os.path.exists(file_path):
-                raise FileNotFoundError(f"Upgrade file {file_path} not found")
-
-            with open(file_path, "rb") as f:
-                package_data = f.read()
-
-            if not package_data:
-                raise ValueError("Upgrade file is empty")
-
-            print(f"Read upgrade package, size: {len(package_data)} bytes")
-
-            upgrade_len = len(package_data)
-            crc = self.calculate_crc(package_data)
-            upgrade_req = struct.pack("<IB", upgrade_len, crc) + package_data
-
-            header_magic = bytes([0xAA, 0x55, 0xAA])
-            cmd = 0x05
-            version = 1
-            result_code = 0
-
-            package_head = struct.pack("<3sBBB", header_magic, cmd, version, result_code)
-            full_packet = package_head + upgrade_req
-
-            print("Full packet prepared:")
-            print(f"Header magic: {package_head[:3].hex()}")
-            print(f"Command: {cmd}, Version: {version}")
-            print(f"Upgrade length: {upgrade_len}, CRC: {crc}")
-            print(f"Total packet size: {len(full_packet)} bytes")
-
-            # 分包处理：每包最大1500字节
-            max_packet_size = 1500
-            total_size = len(full_packet)
-            num_packets = (total_size // max_packet_size) + (1 if total_size % max_packet_size != 0 else 0)
-
-            print(f"Total packets: {num_packets}, each up to {max_packet_size} bytes")
-
-            for row in range(self.table_widget.rowCount()):
-                item = self.table_widget.item(row, 0)
-                if item.checkState() == Qt.Checked:  # 如果该行被选中
-                    ip = self.table_widget.item(row, 1).text()  # 获取IP地址
-                    if ip:
-                        try:
-                            # 创建TCP连接到IP地址的12345端口
-                            with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-                                s.settimeout(5)  # 设置连接超时时间为5秒
-                                s.connect((ip, 12345))
-
-                                for i in range(num_packets):
-                                    start_index = i * max_packet_size
-                                    end_index = min((i + 1) * max_packet_size, total_size)
-                                    packet_chunk = full_packet[start_index:end_index]
-
-                                    print(f"Sending packet {i + 1}/{num_packets}, size: {len(packet_chunk)} bytes")
-                                    s.sendall(packet_chunk)
-                                    print(f"Packet {i + 1} sent successfully")
-                                    time.sleep(0.03)
-                        except Exception as e:
-                            print(f"与IP {ip} 连接失败: {e}")
-                            # self.table_widget.setItem(row, 3, QTableWidgetItem("连接失败"))
-            QMessageBox.information(self, "升级", "升级全部完成")
-        except Exception as e:
-            print(f"Upgrade failed: {str(e)}")
-            QMessageBox.critical(
-                self,
-                "升级",
-                "升级包上传失败"
-            )
-
-    def save_data(self):
-        # 打开文件保存对话框
-        options = QFileDialog.Options()
-        file_path, _ = QFileDialog.getSaveFileName(self, "保存表数据", "", "CSV Files (*.csv);;All Files (*)", options=options)
-        if file_path:
-            # 保存表格数据到CSV文件
-            with open(file_path, mode='w', newline='', encoding='utf-8') as file:
-                writer = csv.writer(file)
-                # 写入表头
-                headers = [self.table_widget.horizontalHeaderItem(i).text() for i in range(self.table_widget.columnCount())]
-                writer.writerow(headers[1:])
-                # 写入表格内容
-                for row in range(self.table_widget.rowCount()):
-                    row_data = [self.table_widget.item(row, col).text() if self.table_widget.item(row, col) else ""
-                                for col in
-                                range(1, self.table_widget.columnCount())]  # Start from col=1 to skip the first column
-                    writer.writerow(row_data)
-
-            print(f"数据已保存到 {file_path}")
-
-    def load_ips(self):
-        # 打开文件选择对话框
-        options = QFileDialog.Options()
-        file_path, _ = QFileDialog.getOpenFileName(self, "选择IP地址文件", "", "Text Files (*.txt);;All Files (*)", options=options)
-        if file_path:
-            # 读取IP地址
-            with open(file_path, 'r') as file:
-                lines = file.readlines()
-
-            invalid_ips = []
-            for i, line in enumerate(lines):
-                ip = line.strip()
-                # 验证IP地址格式
-                if not self.validate_ip(ip):
-                    invalid_ips.append(i + 1)
-
-            if invalid_ips:
-                # 如果有无效IP，弹出提示框
-                QMessageBox.warning(self, "错误", f"以下行的IP地址无效：{', '.join(map(str, invalid_ips))}")
-            else:
-                # 将IP地址加载到表格
-                self.table_widget.setRowCount(len(lines))
-                for i, line in enumerate(lines):
-                    ip = line.strip()
-                    if i < self.table_widget.rowCount():
-                        self.table_widget.setItem(i, 1, QTableWidgetItem(ip))  # 设置IP地址列
-                print(f"加载了{len(lines)}个IP地址")
-
-    def validate_ip(self, ip):
-        # IP地址验证正则表达式
-        import re
-        pattern = r"^(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$"
-        return bool(re.match(pattern, ip))
-
-    def load_all_info(self):
-        # 打开CSV文件选择对话框
-        options = QFileDialog.Options()
-        file_path, _ = QFileDialog.getOpenFileName(self, "选择CSV文件", "", "CSV Files (*.csv);;All Files (*)",
-                                                   options=options)
-        if file_path:
-            # 读取CSV文件
-            with open(file_path, mode='r', encoding='utf-8') as file:
-                reader = csv.reader(file)
-                headers = next(reader)  # 跳过表头
-                self.data = [row for row in reader]
-            if len(self.data) <= 20:
-                self.table_widget.setRowCount(len(self.data))
-            # 确保加载数据后更新分页
-            self.current_page = 0  # 每次加载新数据，默认回到第一页
-            self.update_table()
-
-    def update_table(self):
-        # 获取当前页的数据
-        start_row = self.current_page * self.rows_per_page
-        end_row = start_row + self.rows_per_page
-        rows_to_display = self.data[start_row:end_row]
-
-        # 更新表格内容
-        for row_num, row_data in enumerate(rows_to_display):
-            for col_num, cell_data in enumerate(row_data):
-                self.table_widget.setItem(row_num, col_num + 1, QTableWidgetItem(cell_data))  # +1跳过“选择”列
-
-        # 根据数据量调整上一页和下一页按钮的状态
-        self.prev_page_button.setEnabled(self.current_page > 0)
-        self.next_page_button.setEnabled((self.current_page + 1) * self.rows_per_page < len(self.data))
-
-    def prev_page(self):
-        if self.current_page > 0:
-            self.current_page -= 1
-            self.update_table()
-
-    def next_page(self):
-        if (self.current_page + 1) * self.rows_per_page < len(self.data):
-            self.current_page += 1
-            self.update_table()
-
-
-if __name__ == "__main__":
-    app = QApplication(sys.argv)
-    dialog = BatchOperationDialog()
-    dialog.show()
-    sys.exit(app.exec_())

hell2.csv

@@ -1,21 +0,0 @@
-IP地址,MAC地址,版本号,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,
-,,,,,,

hello.csv

@@ -1,21 +0,0 @@
-选择,IP地址,MAC地址,版本号,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-,192.168.0.161,50-29-4D-20-12-01,1.1,通道1名称,通道1绑定设备,通道2名称,通道2绑定设备
-,192.168.0.177,50-29-4D-20-12-02,2.1,通道2名称,通道2绑定设备,通道3名称,通道3绑定设备
-,192.168.0.174,50-29-4D-20-12-03,3.1,通道3名称,通道3绑定设备,通道4名称,通道4绑定设备
-,192.168.0.185,50-29-4D-20-12-04,4.1,通道4名称,通道4绑定设备,通道5名称,通道5绑定设备
-,192.168.0.168,50-29-4D-20-12-05,5.1,通道5名称,通道5绑定设备,通道6名称,通道6绑定设备
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,
-,,,,,,,

ips.txt

@@ -1,5 +0,0 @@
-192.168.0.161
-192.168.0.177
-192.168.0.174
-192.168.0.185
-192.168.0.168

mainwindow.py

@@ -14,7 +14,6 @@ from scipy.fft import fft, fftfreq
 
 from SamplingDialog import *
 from feauture_calculate import *
-from batch_dialog import BatchOperationDialog
 
 # 启用高DPI支持
 QApplication.setAttribute(Qt.AA_EnableHighDpiScaling)
@@ -177,7 +176,6 @@ class SocketClientApp(QMainWindow):
         self.get_mac_button = QPushButton("获取MAC地址")
         self.mac_config_button = QPushButton("mac配置")
         self.ipv4_config_button = QPushButton("网络配置")
-        self.batch_process_button = QPushButton("批量操作")
         self.calibration_config_button = QPushButton("校准")
         self.get_version_button = QPushButton("版本")
         self.upgrade_button_sampling = QPushButton("采样率/时间")
@@ -237,7 +235,6 @@ class SocketClientApp(QMainWindow):
         button_layout.addWidget(self.get_mac_button)
         button_layout.addWidget(self.mac_config_button)
         button_layout.addWidget(self.ipv4_config_button)
-        button_layout.addWidget(self.batch_process_button)
         button_layout.addWidget(self.calibration_config_button)
         button_layout.addWidget(self.get_version_button)
         button_layout.addWidget(self.save_button_csv)
@@ -298,15 +295,9 @@ class SocketClientApp(QMainWindow):
         self.ipv4_config_button.clicked.connect(self.ipv4_config_dialog)
         self.calibration_config_button.clicked.connect(self.calibration_dialog)
         self.get_version_button.clicked.connect(self.on_button_get_version)
-        self.batch_process_button.clicked.connect(self.on_button_batch)
         # 设置布局策略，确保控件大小随窗口调整
         self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
 
-    def on_button_batch(self):
-        dialog = BatchOperationDialog()
-        if dialog.exec_() == QDialog.Accepted:
-            dialog.close()
-
     def get_extremes(self, data):
         """获取最大和最小的10个值（排序法）"""
         sorted_data = np.sort(data)
@@ -697,7 +688,7 @@ class SocketClientApp(QMainWindow):
                 print(f"Sending packet {i + 1}/{num_packets}, size: {len(packet_chunk)} bytes")
                 self.socket.write(packet_chunk)
                 print(f"Packet {i + 1} sent successfully")
-                time.sleep(0.03)
+                time.sleep(0.05)
             print("Upgrade packet ready to send (commented out actual send code)")
             QMessageBox.information(
                 self,