DataNodeFrequencyTest1/Prologix.py

import serial
import datetime
import os
import time
from decimal import *
class prologix(object):
    serial: object = None
    debug: bool = False
    timeout: float = 2.5
    EOL: str = "\n"

    def __init__(self, addr:int=22, port:str="com1", baud: int = 115200,
                 ser_timeout: float = 3, timeout: float = 2.5, debug: bool = False):
        """
        :param port:
        :param baud:
        :param timeout:
        :param debug:
        """
        self.timeout = timeout


        try:
            self.serial = serial.Serial(port, baudrate=baud, timeout=ser_timeout)
        except serial.SerialException:
            print("!! Port " + port + " could not be opened")
            self.serial = None
        else:
            timeout_str = str(int(self.timeout*1000))
            self.cmdWrite("++addr "+str(addr)) #select instrument gpib address
            self.cmdWrite("++mode 1")  # Change to controller mode
            self.cmdWrite("++auto 0")  # Do not automatically read device after each command
            self.cmdWrite("++eoi 1") #自动添加命令结束标识符
            self.cmdWrite("++eos 2") #结束标识符为LF
            self.cmdWrite("++read_tmo_ms "+timeout_str)  # Transmission timeout
            self.cmdWrite("++ifc")
            #self.cmdWrite("++clr")



        # Check for Prologix device
        self.cmdWrite("++ver")
        check = self.serial.readline()

        if len(check) <= 0:
            print("!! No responding device on port " + port + " found")
            self.serial = None
            return None
        else:
            info = "Device on Port : "+port
            return info




    def cmdWrite(self, cmd: str):
        """
        通过串口写入数据，无数据读回
        :param cmd: 命令
        :return: None
        """
        self.serial.reset_output_buffer()
        self.serial.write(str.encode(cmd+self.EOL))
        self.serial.flush()

    def cmdPoll(self, cmd: str):
        """
        写入命令，并读回返回值
        :param cmd:
        :return:
        """
        self.serial.reset_input_buffer()
        self.cmdWrite(cmd)

        ret = self.cmdRead()
        return ret

    def cmdRead(self):
        self.cmdWrite("++read eoi")

        out = self.serial.readline()
        #print("Read out: ", out)
        if len(out) == 0:
            return None

        return out

    def release(self):
        """
        解除对仪器的控制
        :return: None
        """
        self.cmdWrite("++loc")
        self.serial.close()

class DMM_34401A(prologix):
    def __init__(self, addr:int=22, port:str="com1", baud: int = 115200,
                 ser_timeout: float=3, timeout: float=2.5,debug: bool = False ):
        super(DMM_34401A,self).__init__(addr, port, baud, ser_timeout, timeout)

        self.init_setup()

    def init_setup(self):
        #self.auto_disable
        #self.clear_err()
        #self.auto_enable

        ret = self.cmdPoll("*IDN?")
        #print(ret)


    @property
    def auto_enable(self):
        self.cmdWrite("++auto 1")
        mode = self.cmdPoll("++auto")
        return mode

    @property
    def auto_disable(self):
        self.cmdWrite("++auto 0")
        mode = self.cmdPoll("++auto")
        return mode

    def close_dmm(self):
        self.release()

    def measure(self):
        ret = self.cmdPoll("*CLS;:READ?")
        
        #print(ret)
        if ret==None:
            return None

        value = ret.decode().strip()
        value = float(value)
        value = (value*1000)
        value = Decimal(value).quantize(Decimal('0.000'))
        return value

    def clear_err(self):
        self.cmdWrite("*CLS")

    def measure_multi(self, count):
        measure_result = []
        index  = 0
        while index < count:
            ret = self.measure()
            if ret:
                measure_result.append(ret)
                index += 1

        return measure_result

    def set_measure_voltage_ac(self, range:str="AUTO", band:str="20"):
        """
        设置测量AC电压
        :param range【量程】: AUTO, MIN, MAX
        :param band【带宽】: 3, 20, 200
        :return: Conf info
        """
        self.cmdWrite("CONFigure:VOLTage:AC "+range)
        ret = self.cmdPoll("CONFigure?")
        print("测量模式:",ret.decode().strip())

        self.cmdWrite("DETector:BANDwidth "+band)
        ret = self.cmdPoll("DETector:BANDwidth?")
        print("AC带宽:",ret.decode().strip())

    def set_measure_voltage_dc(self, range:str="AUTO"):
        """
        设置测量DC电压
        :param range【量程】: AUTO, ...
        :return:
        """
        self.cmdWrite("CONFigure:VOLTage:DC "+range)
        ret = self.cmdPoll("CONFigure?")
        #print(ret)
    def Close(self):
        self.release()